Thread: Pegged Ashcfroft Locker Installed !

Originally Posted by rangieman

Hi all i finaly got around to fitting my ashcroft locker to my ashcroft pegged housing,
One slight hiccup which i have emailed dave and attached pics to explain what ive done

I had to machine 6mm off the outer edge of the carrier to clear the pegging , Im certain this should not be a problem as the outer phisycal size of the ashcroft carrier is a lot bigger than the standard rover carrier
See attached pics

Hmmmmmmmm this will be an interesting outcome,as I am sure you aren't the first person to fit the new locker into a pegged housing.Interested in Daves response,hopefully he will respond here

Rangieman, if you don't mind, how much was the pegged housing? (can pm if you like)

So when we heading out to test it chris?!?

Hi,

looks very good,

we have to turn the centres down to 162.5mm OD for our pegged casings,

Dave

Originally Posted by Vern

Rangieman, if you don't mind, how much was the pegged housing? (can pm if you like)

Hey Damien i bought the diff off a member on here that had brought it back from the UK , He had it in a Bowler , It also had a six pinion carrier fitted to the pegged housing $500

Get on to Andrew Curry at Hiline in Traralgon he also does pegging

Thankyou Dave , I also got your email

Originally Posted by ashtrans

Hi,

looks very good,

we have to turn the centres down to 162.5mm OD for our pegged casings,

Dave

Hopefully getting slotted in the hole today mate , Will have to be soon as im dam near withdraw mode almost

Originally Posted by PSI250

So when we heading out to test it chris?!?

Well its fitted and all working no probs yipee took 2 hours by myself Now for a test when time permits