near enough to...
pressure plate and clutch plate change with the engine and application not the box.
Spline count is the same size/diameter BUT the spigot mount changes size/length but thats not going to stop you from using the friction plate.
Can anyone tell me if a clutch plate that's off an LT77 gearbox will fit the splines on an R380 gearbox and are the pressure plates the same, Thanks in advance, Regards Frank.
near enough to...
pressure plate and clutch plate change with the engine and application not the box.
Spline count is the same size/diameter BUT the spigot mount changes size/length but thats not going to stop you from using the friction plate.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Thanks Dave, Myles has done a clutch in his Disco, on his way down here now (from Canberra) to pick one up, Regards Frank.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks