-
[QUOTE=LOVEMYRANGIE;1602296].....
... but the hub is fine. Genuine unit too.
Has the number on it, will have a look.
Andrew
Edit: ETC1260 hub, AMG001 blade.
QUOTE]
Alas ! - rongg wun for my bus.... Needs ER3443 according to nearly every retailer around. RAVE assures me that its a 36mm RH thread. (stand spanner vertical, belt it sharply towards driver's side)
Thanks for the kind offer :).
Darn !
With a bit of Time Management. (!) tonite I'll attempt the removal of mine which will doubly-confirm. :p -'Tis the Oirish in me, to be sure-to be sure.
James
-
Interested in the outcome here... please post when you've fitted the new viscous fan? Sounds identical to a problem I'm having on my Disco 300tdi.
-
Same symptoms on my 300 TDI.When motor is hot[switched off] the fan can easily be turned by hand ie freewheel.Will lock it up with a couple of self tap screws to see if it makes a difference?
-
Locking the fan/hub on a LR is not regarded as a Good Idea, due to the LR fan's inability to keep itself together at such high RPM. - Wiser and more experienced folk here warn of blades flying off.:(
I was fortunate with my old Crown, fan had been bolted solid for a long time before I got it, and it was still in one piece 2 years later when it was Euthanased...
Been looking after my own health for a while, so the Event Horizon has been parked up on charge. The few times I've driven it have seemed ok... :angel:
James.
'95 2WD Classic with working EAS :p
