Superior Engineering Superflex arms for Rovers.

Here's what the 'flexier' SP pin end bush looks like.

http://www.aulro.com/afvb/attachment...1&d=1361842718



Part #'s should be in the SP online catalogue.

Sorry for the slow updates guys.

Stocker test rig

https://www.aulro.com/afvb/images/im...13/07/1298.jpg


Single Superflex arm, stock everything! rear sway bar no front swaybar.

https://www.aulro.com/afvb/images/im...13/07/1299.jpg

I will have the new dropped radius arms ready to test by mid week and will post up some pics soon as.

Thanks for keeping us updated.

Shame they weren't ready earlier so I could take a set to test at cape York in a fortnight.

Cheers, Adam.

the radius arms are getting there at last and I should have a 2" and 4" test set in the next week or so.

They are seriously beefy! 32mm gr350 plate

https://www.aulro.com/afvb/images/im...13/07/1211.jpg

they work well as a full set - radius + superflex arms.

https://www.aulro.com/afvb/images/im...13/07/1212.jpg

https://www.aulro.com/afvb/images/im...13/07/1213.jpg

cheers
Greg

Greg,
Thanks for the pics.

Just to check;
-What bushes are they in the arms at the diff end?
-What bushes are used at the chassis end?
-Are you developing shocks to compliment the extra travel?

Cheers, Looking forward to hearing from you,
Adam.

luckily these arms will fit a real Land Rover and not just mums school bus;)

Quote:

---

Originally Posted by kreecha

Greg,
Thanks for the pics.

Just to check;
-What bushes are they in the arms at the diff end?
-What bushes are used at the chassis end?
-Are you developing shocks to compliment the extra travel?

Cheers, Looking forward to hearing from you,
Adam.

---

bit of a secret at the moment, but they are readily available and waaaaaaaay better than the rover ones, and cheaper to replace. They are available in std and holey! for those that want the extra flex. The chassis end also uses a bush with slightly more rubber, they also allow the use of billet cup washers and spacer to move the front diff forward if required, as cheap upgrades.

For shocks I have some awesome upgrades and at prices that will blow many away. I am hoping to sort out - adjustable remote res profenders for around $325 each .(same build as the TF 11") Also looking at Amada remote res (similar to patrol) for under $300. Sizing will START at 9" travel and go well over 12".

How does that sound?

Quote:

---

Originally Posted by 1MadEngineer

bit of a secret at the moment, but they are readily available and waaaaaaaay better than the rover ones, and cheaper to replace. They are available in std and holey! for those that want the extra flex. The chassis end also uses a bush with slightly more rubber, they also allow the use of billet cup washers and spacer to move the front diff forward if required, as cheap upgrades.

For shocks I have some awesome upgrades and at prices that will blow many away. I am hoping to sort out - adjustable remote res profenders for around $325 each .(same build as the TF 11") Also looking at Amada remote res (similar to patrol) for under $300. Sizing will START at 9" travel and go well over 12".

How does that sound?

---

I need these things finished ASAP:D
And need shocks that are well over 12",as I already have 11.5" shocks and max them out.The problem isn't the extended length,it is getting a longer shock,that doesn't extend the closed length too much....... so when will my arms and shocks be ready ?:D:D

Quote:

---

Originally Posted by LowRanger

I need these things finished ASAP:D
And need shocks that are well over 12",as I already have 11.5" shocks and max them out.The problem isn't the extended length,it is getting a longer shock,that doesn't extend the closed length too much....... so when will my arms and shocks be ready ?:D:D

---

can you get me the closed and open lenght please and i will see what i have suitable.

Quote:

---

Originally Posted by 1MadEngineer

can you get me the closed and open lenght please and i will see what i have suitable.

---

Yep,I could do that,but I would probably need to change them when you get these supaflex arms finished.