Superior Engineering Superflex arms for Rovers.

What are they adjustable for? Bump or rebound + are they rebuild-able/valvable and how does the valving scale compare to known value setups (Bilstein/Fox)? End fittings, options/interchangeable? Stainless body/reservoir, hard rod covers (not plastic or flexi?

Price wise they are on the money, Fox's and Bilstein's are cheaper (on paper) from overseas but shipping is a killer. A set of Fox's from New York is over $300-.

Also: what's the OD of the remote can? I may have a lead on some cheap mounting options for you.

Quote:

---

Originally Posted by 1MadEngineer

This is the new adjustable remote reservoir we have to go with the shocks. I will just finalize some better shock sizings as we are able to design these to suit most lifts. I have some currently that should suit 0,2,3,4" lifts (9"-11" travel!! :twisted: ) and at approx $320ea i think. How does that compare?

---

Not enough travel,I already have 11.5" travel in the front now,without supaflex arms.Need the supaflex arms and then work out what I will need;)

Quote:

---

Originally Posted by clubagreenie

What are they adjustable for? Compression Bump or rebound + are they rebuild-able/valvable YES and how does the valving scale compare to known value setups (Bilstein/Fox)? #2 is OE, and 7 is ~15% stiffer. End fittings, options/interchangeable? Stainless body/reservoir, hard rod covers (not plastic or flexi?

Price wise they are on the money, Fox's and Bilstein's are cheaper (on paper) from overseas but shipping is a killer. A set of Fox's from New York is over $300-.

Also: what's the OD of the remote can? I may have a lead on some cheap mounting options for you. 52mm OD

---

hope that helps

Got a few pics of the disco with a pair of std 0" radius arms as well as one of the new rear arms.... ;)

https://www.aulro.com/afvb/images/im...013/07/358.jpg

https://www.aulro.com/afvb/images/im...013/07/359.jpg

Thats a 33" tire for comparison

https://www.aulro.com/afvb/images/im...013/07/360.jpg

https://www.aulro.com/afvb/images/im...013/07/361.jpg


With the new rear arm in for testing.

https://www.aulro.com/afvb/images/im...013/07/362.jpg

https://www.aulro.com/afvb/images/im...013/07/363.jpg

https://www.aulro.com/afvb/images/im...013/07/364.jpg

Quote:

---

Originally Posted by LowRanger

Not enough travel,I already have 11.5" travel in the front now,without supaflex arms.Need the supaflex arms and then work out what I will need;)

---

The next lot of sizings will be approx
397 cc 690 oc - 11.5" travel
420 cc 736 oc - 12.4" travel
440 cc 776 oc - 13.2" travel
our open closed measurements are really good, which allows for a lot better useable travel.

Quote:

---

Originally Posted by 1MadEngineer

The next lot of sizings will be approx
397 cc 690 oc - 11.5" travel
420 cc 736 oc - 12.4" travel
440 cc 776 oc - 13.2" travel
our open closed measurements are really good, which allows for a lot better useable travel.

---

Do you know how much extra travel you are getting out of the supaflex arms,that will be a determining point.Not much use ordering shocks until the arms are available and I know how much more flex they give.Looks good,I would like to ring and talk a few things over,is that possible?

Ahh, new rear arm is eye to eye! Very nice! Have you considered a (possibly generic) long arm arrangement to reduce anti-squat?

Quote:

---

Originally Posted by Slunnie

Ahh, new rear arm is eye to eye! Very nice! Have you considered a (possibly generic) long arm arrangement to reduce anti-squat?

---

I have already been thinking about them :twisted: but I am not sure if they would actually sell. Even the nissan (wanna-be comp truck) guys rarely put them on as they are waaaaaaay too hardcore--------- go figure!
Personally they are one of the first mods we do to a 4wd, but thats just me :angel:

Quote:

---

Originally Posted by 1MadEngineer

I have already been thinking about them :twisted: but I am not sure if they would actually sell. Even the nissan (wanna-be comp truck) guys rarely put them on as they are waaaaaaay too hardcore--------- go figure!
Personally they are one of the first mods we do to a 4wd, but thats just me :angel:

---

If there is anyway of getting them engineered im in!

Quote:

---

Originally Posted by uninformed

If there is anyway of getting them engineered im in!

---

Been thinking about this, and I might have a solution! :twisted: and if my plan works out they should be engineerable. will chat more soon.