Results 1 to 5 of 5

Thread: Un-even suspension 110 tray back.

  1. #1
    LOW135 Guest

    Un-even suspension 110 tray back.

    Hi all,

    I recently decided to replaced spring and shocks in my 95 110 single cab ute because the front left was a bit sagged and shockers were flogged out

    I replaced all round with new ones,

    And the front of the ute is still sitting slightly out of level, dipping down about 10 to 15 mmin the front left corner.
    Is this a common problem?
    What do I need to do to fix?

    Thanks

  2. #2
    Join Date
    Oct 2006
    Location
    canberra
    Posts
    3,002
    Total Downloaded
    0
    The springs would of been left and right handed it sounds normal to me once your in it levels out

  3. #3
    Join Date
    Jul 2008
    Posts
    433
    Total Downloaded
    0
    Hi

    Yes that sounds right to me too.

    When I did my springs a little while back the passenger sides sits lower to account for weight of driver and road camber a bit too I'd guess.

    My Suspension Stuff front springs where clearly labelled to go this way.

    Clive

  4. #4
    Join Date
    Oct 2006
    Location
    canberra
    Posts
    3,002
    Total Downloaded
    0
    Mines got good lean on with its brand new dobbinsons mines a 110 tray back and the springs were marked left and right

  5. #5
    LOW135 Guest
    Ok no worries, springs were marked lef and right and I put the. In the correct side, less concerned now to know others are the same, I can stop worrying so much now
    Thanks

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!