I will have to check that out,as I know that mine has been accident damaged and could have the incorrect squab in it,as it catches me under the knee too.
cheers
Printable View
I will have to check that out,as I know that mine has been accident damaged and could have the incorrect squab in it,as it catches me under the knee too.
cheers
Uncle, when I pulled my drivers seat out, base and all, I seperated the seat because I found the base cracked and needed welding. The base by the way is not interchangeable as the floor is not flat.Quote:
Originally Posted by UncleHo
Quite by accident I noticed that the seat was not square.
I stood behind it tilted it back and saw that the squab was pointing off to the left. This meant that my right leg was resting across the top of the side raised area causing the discomfort.
I figured that the passenger seat squab must point off to the right which would mean that my leg would not be riding high on the side.
So pulled the passenger seat and swapped them around. All good !!!
Cheers.
First I have ever heard of that. I must have buggered hundreds of them.Quote:
Originally Posted by olbod
Quote:
Originally Posted by Mr Whippy
Yes me too.
I read it here on the Forum somewhere recently.
But I will be careful in the future, just in case !!!
Well it is good to be back driving me Disco again. All good.
Seats now quite comfortable
Brakes all done, servo, master, rotors, pads, bearings and seals.
When the rain clears up I will replace the four tie rod end thingy's and adjust the steering box a tiny bit.
Even in the shed when it is miserable and wet out, I prefer the great indoors. Being a professional layabout I dont need to be in a rush.
I have also been a bit preoccupied sorting the P38a ( THE BITCH ) but that is another horrible story.
Cheers.