Reply With QuoteIf a classic rangie won't go that low, then you haven't got a hope in a d3.
Access height D3
Hey all.. Quick question I'm wanting to know what the height of the highest point is on a D3 when air suspension is set to access height! As I'm almost ready to purchase one and wanting to transport it from Perth to Sydney on the Indian pacific train (unaccompanied motorail) they have height restrictions Perth to Adelaide is fine but Adelaide to Sydney is restricted to 1.57M would a D3 fit with the susp locked at access height and I've also seen a bit of talk about the LLams module which ill be interested in getting aswell does that module lower it even more than the factory setting?
Please help..
Thanks
ForumSage
If a classic rangie won't go that low, then you haven't got a hope in a d3.
LordRover
SupporterNo way. Most 4wds would be too high and many normal 2wd cars would be too high.
Garry
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
Haha yea I was expecting that kind of reply it will only be able to go as far as Adelaide then..
Which max height is 1.94M
Swaggie
My D4 handbook shows 1.888 m for access height. Bump-stops are around 50 mm lower so still too high. Highest point is directly above the rear door handles.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks