-
7th August 2013, 01:32 PM
#1
rear windows D1
Hi,
Have undone the glovebox to get to the harness that controls the rear windows.The top harness came out easy,the bottom harness dont want to move.
Is there a way to get it to come out so that I can resolder the ecu so I got back windows that go up/down please.
Its on the 95 300tdi.
Thanks
cheers

2014 Freelander SE TD4
2003 Range Rover TD6
92 disco tdi manual sold
95 disco tdi auto gone
-
7th August 2013, 04:17 PM
#2
It has a clip, which you have to un clip somehow... Just gotta do whatever works.
But be gentle or you'll destroy the whole board like I did the first time...
Cheers
Will
-
7th August 2013, 06:50 PM
#3
If you search back on the forum or on the net there's a good description of getting it out and the repairs (with pictures).
Once you do get it out you cut the clip off cause you never know when you're going to have to pull it out again. Pulled mine about a year ago, resoldered the offending joint and it was OK for about 6 months, then had to resort to wiggling the wires to make it work. Latest fix (fingers crossed) was a new board from Pick n Payless which so far is going well
Good luck
-
8th August 2013, 06:36 PM
#4
Might see if I can cut the offending bit off to get it out.
Thanks for the tips guys.
cheers

2014 Freelander SE TD4
2003 Range Rover TD6
92 disco tdi manual sold
95 disco tdi auto gone
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks