Results 1 to 4 of 4

Thread: rear windows D1

  1. #1
    Join Date
    May 2006
    Location
    Ulverstone,TAS
    Posts
    1,513
    Total Downloaded
    0

    rear windows D1

    Hi,

    Have undone the glovebox to get to the harness that controls the rear windows.The top harness came out easy,the bottom harness dont want to move.
    Is there a way to get it to come out so that I can resolder the ecu so I got back windows that go up/down please.
    Its on the 95 300tdi.

    Thanks

    cheers

    2014 Freelander SE TD4
    2003 Range Rover TD6
    92 disco tdi manual sold
    95 disco tdi auto gone

  2. #2
    Join Date
    Apr 2009
    Location
    South Sydney
    Posts
    2,499
    Total Downloaded
    0
    It has a clip, which you have to un clip somehow... Just gotta do whatever works.

    But be gentle or you'll destroy the whole board like I did the first time...

    Cheers
    Will

  3. #3
    Disckombi Guest
    If you search back on the forum or on the net there's a good description of getting it out and the repairs (with pictures).

    Once you do get it out you cut the clip off cause you never know when you're going to have to pull it out again. Pulled mine about a year ago, resoldered the offending joint and it was OK for about 6 months, then had to resort to wiggling the wires to make it work. Latest fix (fingers crossed) was a new board from Pick n Payless which so far is going well

    Good luck

  4. #4
    Join Date
    May 2006
    Location
    Ulverstone,TAS
    Posts
    1,513
    Total Downloaded
    0
    Might see if I can cut the offending bit off to get it out.

    Thanks for the tips guys.

    cheers

    2014 Freelander SE TD4
    2003 Range Rover TD6
    92 disco tdi manual sold
    95 disco tdi auto gone

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!