Thread: Drowned Disco

[img]style_emoticons/<#EMO_DIR#>/sad.gif[/img] Well Your photos look like a sad affair, did you get any body damage from the log on the drivers side..

You should check anything on your drineline you can put oil in basically, and even your bearing should have a quick seeing to. If the photos are any show you look to have been in sandish ground so everything was probably hot when you dunked her, a good bath like that can result in lots of water everywhere. [img]style_emoticons/<#EMO_DIR#>/sad.gif[/img] (like I gotta tell you) 8O 8)

You have answered a long standing question for me, so thanks,,,,, :? :roll: those disco door seals ....they are fitted to keep the water in 8O those solihull comedians (engineers),,,,,, :roll: [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img] [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img] [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img] [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img] [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img] [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img] they crack me up.

Drain all the old oil from the diff's, gearbox and everything.

While draining check out underneath for any sand or water that has gotten into somewhere it shouldnt.

Originally posted by igould
recently put our 97 v8 disco in the creek. after getting towed out backwards, i pulled plugs out & cranked over to get water out of engine. it ran alright after that, but with weird electrical probs until it dried out (hazard lights flashing, remote locking operating randomly). pulled out seats and carpet when i got home to dry it out.
(photos posted in gallery)

I noticed in the last picture that you were snatched out with what looks like a snatch "rope' rather than a strap, do you have any comments on these vs straps.


Bushie

to answer a couple of questions:
no, didn't get a mark on the body from the log. it was about 1-2" away from body for full length of car. luck!!
the snatch "rope" wasn't mine, but belonged to the recovery vehicle. he called it a "black snake", but whether that was a nickname or product name i don't know. he owns a 4x4 shop here in melbourne. you can contact him on allterrain4x4@bigpond.com if you want more info. his name is dragan.
also, i noticed when i pulled out the carpets that there were (unplugged) drain holes under the seat-belt covers on the door pillar. doesn't matter how good the door seals are if you have open holes in the floorpan, i guess.

If water can get out, it can get in. [img]style_emoticons/<#EMO_DIR#>/laugh.gif[/img]

For the central locking - does it still centrally unlock with the key, or is it all manual? If it is all manual, it means the relay has died:


<div class='quotetop'>QUOTE</div><div class='quotemain'>
CDL Supply
Circuit supply
A feed from the battery positive terminal is connected by an R wire to the engine compartment fusebox, where it passes to fusible link 3 and fuse 13. The feed from fusible link 3 is connected on an NR wire to the passenger compartment fusebox where it passes through fuses 1 and 20.

From fuse 1 in the passenger compartment fusebox the feed is connected to the contacts of the four electronic CDL relays in the passenger compartment fusebox. When the relay contacts are open they are connected on a B wire from the passenger compartment fusebox to earth header C0017 LHD/C0018 RHD.

From fuse 20 LHD/ fuse 21 RHD in the passenger compartment fusebox the feed is connected on a P wire via header C0289 LHD and a PB wire via header C0292 RHD, to Body Control Unit (BCU) pin C0661-19. A second feed from fuse 20 LHD/ fuse 21 RHD is connected on a GU wire to the passive coil which surrounds the ignition switch.

The feed from fuse 13 is connected on a PN wire to BCU pin C0660-13 and
provides a permanent battery supply to the BCU. A second feed from fuse 13 is connected on a PN wire to the passenger compartment fusebox and supplies power to the electronic CDL relays in the fusebox. A third feed from fuse 13 is connected on an NB wire to the inertia switch.
[/b][/quote]