what's this bracket ?

a thin steel wire is all that is required...
or buy a LRA diff guard which cant come off :wink:

http://www.lrautomotive.com.au/148.html

1. OK - how to attach the wire to the tab (with hole) on the dif guard and where/how on the LR ?

I already have the diff guard. Very solid. Cost me $50 new.

pics please... and where did you buy for $50...
easiest way is to get some steel wire from bunnings... crimp a steel lug onto ends.. weld one end to diff cover.. bolt other end to LHD panhard mount :wink:

My Disco wears one of these in the front.

http://www.lrexpert.com.au/parts_gif/large/52.jpg

From Graeme Cooper.

www.lrexpert.com.au

So far so good. I haven't contemplated ripping it off yet.

What else will break if you have gone that far into the "rockies".

There are rears for the rover and salibury's as well.

I'll post a photo next time I have a digital camera available (yes I know I should buy one). It was made for me by a member of the Brisbane LROC.
He does them for front diffs only at this stage coz of the different rear diff setups, and its only an after-work type of thing.