Page 5 of 47 FirstFirst ... 3456715 ... LastLast
Results 41 to 50 of 464

Thread: Did You know this 'Can' happen to a diesel (Death by oil)

  1. #41
    Join Date
    Jan 1970
    Location
    VIC
    Posts
    3,536
    Total Downloaded
    0
    Maybe the head gasket is leaking. Only need to look at a Tdi head gasket sideways and they blow. Could've gotten hot. Check the coolant is at the right level. Then crank away with the cap off the expansion tank.

  2. #42
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    what should I be looking for when cranking with the coolant cap off?

    I will check the one pair of wires that go into injection pump.

  3. #43
    Join Date
    Jan 1970
    Location
    VIC
    Posts
    3,536
    Total Downloaded
    0
    Quote Originally Posted by uninformed View Post
    what should I be looking for when cranking with the coolant cap off?

    I will check the one pair of wires that go into injection pump.
    A fountain.

    Good idea on the wires too, not sure which fuse they go back to on a Defender though.

  4. #44
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    OK - as mentioned, do the coolant thing and check for it blowing out there.

    However (hopefully) it will be fuel. If you undo the line on #1 injector then fuel should spurt out while cranking if the engine is getting fuel.

  5. #45
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    umm which injector is #1?

  6. #46
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    I just removed the bleed bolt from the top of the fuel filter housing, then pumped the lift pump. Nothing. I then turned the crank 1/8 of a revolution by hand and tried again (to rotate cam) I did this 4 times, pumping the lever say 100 times each go. No fuel coming anywhere near the bleed bolt hole

  7. #47
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by uninformed View Post
    umm which injector is #1?
    The first one.

    Ok, the front one.

    Were you able to get fuel up to the filter at all ?

  8. #48
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by uninformed View Post
    I just removed the bleed bolt from the top of the fuel filter housing, then pumped the lift pump. Nothing. I then turned the crank 1/8 of a revolution by hand and tried again (to rotate cam) I did this 4 times, pumping the lever say 100 times each go. No fuel coming anywhere near the bleed bolt hole
    Maybe it's done the lift pump diaphragm and filled the sump with fuel as Dave suggested as a possibility earlier ?

    Do you have a spare ?

  9. #49
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    spare pump or diaphragm? I have neither

  10. #50
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    I meant pump.

Page 5 of 47 FirstFirst ... 3456715 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!