Yes they are different.
Its not that hard to do it if you have a good eye and confidence.
if not then cough up the $$ as you have no choice.
Steve
Printable View
Yes they are different.
Its not that hard to do it if you have a good eye and confidence.
if not then cough up the $$ as you have no choice.
Steve
I would agree with the above. If your not confident DONT DO IT!. If you are it's nothing. It's nothing to drill a hole in a piece of steel. The only thing thats stopping you is your Land Rover badge (No disrespect intended). Seriously take your time, get your measurments right and drill away, it's all good. It's just a piece of steel (or aluminium) after all.
Cheers
Mick
Hi Guys
I recently purchased a Bosh nibler from Cash converters.Its the most awesome bit of gear for cutting sheetmetal.You can also get air powered ones or drill versions for around $100, if you do any tin cutting,well worth the investment.
Andrew