Will do thanks
Printable View
Will do thanks
I think you'll find he replaced your rover rear end (series 2 Fender)with a salisbury one and had the locker fitted at the same time. https://www.aulro.com/afvb/Quote:
Originally posted by George130
Rear maxi locker and god knows what else he did but total was $4500. Done by the previous owner. One day I might crack it open and remove the diamonds and gold.
I think you'll find he replaced your rover rear end (series 2 Fender)with a salisbury one and had the locker fitted at the same time. https://www.aulro.com/afvb/[/b][/quote]Quote:
Originally posted by D110V8D+--><div class='quotetop'>QUOTE(D110V8D)</div><div class='quotemain'><!--QuoteBegin-George130
Rear maxi locker and god knows what else he did but total was $4500. Done by the previous owner. One day I might crack it open and remove the diamonds and gold.
Thanks for that. I did wonder if it was to do with fitting the auto and getting the ratio's right. I have maxi drive stup axles in the front as well.
Must be something about other states that make it cheaper than NSW, cause the cheapest i found to put one in my D2 was B Davis AT $3600 supplied and fitted that includes the rear tail shaft replacement, the next cheapest was $3750.
So how come so cheap Mick for the D2.
Baz.
Hey BazQuote:
Originally posted by Redback
Must be something about other states that make it cheaper than NSW, cause the cheapest i found to put one in my D2 was B Davis AT $3600 supplied and fitted that includes the rear tail shaft replacement, the next cheapest was $3750.
So how come so cheap Mick for the D2.
Baz.
The price I paid maybe worked out to be a little cheaper than you have been quoted probably because I - in a moment of visa madness :oops: - decided to put a whole lot of other things in at once. While Rick had the diffs apart to put the diff gears in, I thought I may as well stick the rear locker in and then I thought well if the locker goes in then I will obviously be doing some more serious off road stuff so I may as well toughen up the CV's, so they went in with the axles, and at the same time Rick beefed up the tail shafts to cope with the added strain 8O . There were a few other small items he did but I had worked out a price before with Rick to fit the Maxi kit and by all accounts, he did it for a good price.....I think he was surprised by the amount of work involved though!!
Good luck with your search. Once fitted you will get over the price pretty quickly as it really is an astounding piece of engineering and will take you anywhere you want to go https://www.aulro.com/afvb/ https://www.aulro.com/afvb/
Aye, Mick
Well the CVs are $2800 for the kit, i don't know how much the 4.11s gears are but i'm only doing the rear at the moment so the gears will have to wait as i don't know if you can put the 4.11s in the rear only.
Thanks Mick.
No probs BazQuote:
Originally posted by Redback
Well the CVs are $2800 for the kit, i don't know how much the 4.11s gears are but i'm only doing the rear at the moment so the gears will have to wait as i don't know if you can put the 4.11s in the rear only.
Thanks Mick.
I suspect that you can't just put the 4.11's in the rear only, you will have to all diffs - someone else will confim i'm sure. What tyre size are you running? I went the 4.11's as I am running 32" and it threw my gearing out something rotten off road. The 4.11's now give me the crawlability I need in low range - actually slightly slower than it was with standard gearing and tyres and much better than before.
It's a funny old game the modification thing, one thing inevitably leads to another but there seems to be no way of stopping - definitly adictive :roll: .
Good luck and as I said, once the locker is in you will not regret it https://www.aulro.com/afvb/ https://www.aulro.com/afvb/ .
Aye, Mick
No probs BazQuote:
Originally posted by MickG+--><div class='quotetop'>QUOTE(MickG)</div><div class='quotemain'><!--QuoteBegin-Redback
Well the CVs are $2800 for the kit, i don't know how much the 4.11s gears are but i'm only doing the rear at the moment so the gears will have to wait as i don't know if you can put the 4.11s in the rear only.
Thanks Mick.
I suspect that you can't just put the 4.11's in the rear only, you will have to all diffs - someone else will confim i'm sure. What tyre size are you running? I went the 4.11's as I am running 32" and it threw my gearing out something rotten off road. The 4.11's now give me the crawlability I need in low range - actually slightly slower than it was with standard gearing and tyres and much better than before.
It's a funny old game the modification thing, one thing inevitably leads to another but there seems to be no way of stopping - definitly adictive :roll: .
Good luck and as I said, once the locker is in you will not regret it https://www.aulro.com/afvb/ https://www.aulro.com/afvb/ .
Aye, Mick[/b][/quote]
Only have the 31s for now although it's about 4% over on the speedo now the biggest thing was the power drop 8O , the price of Maxi drive went up $700 thats why so dear now, Roverland in Vic can do it for just over $3000
We will haggle with B Davis and see if we can bring his price down.
Thanks, Baz.
Yeah I ended up fitting (got Rick to fit) a True Speed speedo correction unit as my readings were about 10% out from memory and it also dissabled out my cruise - got to have cruies!! All reading about right now though and I have cruise again.Quote:
Originally posted by Redback
Only have the 31s for now although it's about 4% over on the speedo now the biggest thing was the power drop 8O , the price of Maxi drive went up $700 thats why so dear now, Roverland in Vic can do it for just over $3000
We will haggle with B Davis and see if we can bring his price down.
Thanks, Baz.
Aye, Mick