Thread: Help with transfer case mount

Hi all, I'm new to english cars. My red 84 range rover is my new farm vehicle and it needs a new drivers side transfer case mount. I have a new one here. I have removed the lower bracket that bolts to the chassis rail but is there a tool that will get the upper nut off?
The steel bracket that attaches to the transfer case has me stumped too. I can see no way of removing it to gain access to the upper nut.
This seems ridiculously simple, what am I missing?
Carl

If access is inadequate to get a ring spanner on any of the mount nuts and bolts, undo the other side chassis mount and lower the back of the TC until there is enough room. The last time I had a transfer case out was a slightly later model and I had no trouble undoing the mount off the TC. I just used a flat OE/ring spanner and a tube for leverage.