Would an A/C condenser have sufficient flow?
Printable View
Would an A/C condenser have sufficient flow?
As an oil cooler ?Quote:
Originally Posted by blitz
They are only narrow, I'd reckon there'd be too much pressure drop and it'd possibly rupture just from 'hydraulicing' ?
Real oil coolers aren't that dear.
I went searching yesterday, these are 405mm wide. Setrab Oil Coolers - 9 Series "Extra Wide"
OK, we'd need to fab mounts and obtain hose and fittings, maybe use some sexy Speedflow ones ? :D
Yes, but when I looked through the catalogue they all seemed to be 280mm or so wide, just various heights.Quote:
Originally Posted by Pedro_The_Swift
I was thinking a wider one might be better so I could have a lower stack height.
The BD one actually looks like a PWR in that photo.
Like Slunnie, mine is attached as far forward as possible and is in series with the original, leaves lots of air room behind, I also bought the half inch tube model so no pressure difference,, at least that was the idea--
Bingo! Here it is. Its an engine oil coolerQuote:
Originally Posted by rick130
PWR Performance Products | 37mm External Plate & Fin Close Mesh
Thanks all I have used this as reference and now have a 15 row ProFlow oil cooler, AN-8 piping and fittings, modified D2 auto cooler and pipes (from a private wrecking) ready to swap out.....https://www.aulro.com/mobile-gallery...453675be6c.jpg
https://www.aulro.com/mobile-gallery...e8e2dba195.jpg