Rusty camshaft.

1000 wet and dry with Kero, oil, trsnsfluid, wd40 etc wont hurt it at all.
You're only doing by hand very lightly what a linnisher does.
But if it doesn't come up spotless you will need to take it to someone for a proper job or get another cam.

My 2c... Dump it in a 10% molasses / water mix and leave for a couple of weeks or as required. Remove and rinse in water. Lightly oil. Inspect. Assess. Decide. (Post pics here and get a vote of you're not sure). Very light pitting won't hurt it as it'll just hold some more oil on the lobes, heavy putting and its a regrind or junk...
The molasses will remove any rust without removing any base metal or doing any damage at all in any way. Note that anything abrasive will remove part of the surface, irrespective of method. Also it's basically free 😁 Just takes time.

Quote:

---

Originally Posted by DiscoClax

My 2c... Dump it in a 10% molasses / water mix and leave for a couple of weeks or as required. Remove and rinse in water. Lightly oil. Inspect. Assess. Decide. (Post pics here and get a vote of you're not sure). Very light pitting won't hurt it as it'll just hold some more oil on the lobes, heavy putting and its a regrind or junk...
The molasses will remove any rust without removing any base metal or doing any damage at all in any way. Note that anything abrasive will remove part of the surface, irrespective of method. Also it's basically free 😁 Just takes time.

---

Molasses? That's a new one. It IS cheap, especially from stock feed agents.

Quote:

---

Originally Posted by johntins

Molasses? That's a new one. It IS cheap, especially from stock feed agents.

---

Not really a new one, I mentioned it a few posts ago.[thumbsupbig]

Quote:

---

Originally Posted by Roverlord off road spares

Soak it in 'coca cola some one said for removing surface rust to me once , another said molassas never tried it myself but apparently it is supposed to work.

---

Quote:

---

Originally Posted by Roverlord off road spares

Not really a new one, I mentioned it a few posts ago.[thumbsupbig]

---

Apologies, Mario. Saw the coca cola thing but missed the molasses.

Maybe a bit of a wipe with that CLR stuff could remove the rust.

Quote:

---

Originally Posted by johntins

Apologies, Mario. Saw the coca cola thing but missed the molasses.

---

Maybe Coca cola has molasses in the secret formula?

Coke has phosphoric acid in its recipe. This acid is used in rust converter. Until the late 1960s/ early 1970s it had copper (Cu) in its recipe. At the time it was the second largest user of copper in the world. I believe phosphoric acid replaced the copper to keep giving Coke its "bite".

Quote:

---

Originally Posted by bsperka

Coke has phosphoric acid in its recipe. This acid is used in rust converter. Until the late 1960s/ early 1970s it had copper (Cu) in its recipe. At the time it was the second largest user of copper in the world. I believe phosphoric acid replaced the copper to keep giving Coke its "bite".

---

Strewth. No wonder I hate the stuff, and insist on it being 'diluted'.

It's really good for cleaning toilets too!

Regards Philip A