Thread: disco thermo fan hub

Just been through this exercise.

Davies Craig part number 2806 is the one to get IF the fan nut is 37 mm across the flats. Expect to pay about $270+gst from reputable oarts supplier.

hth

Pete

harry, is it a 10'' fan???
are you talking about the two in the front for the a/c cooler??

if they are then yes the 10'' davis craig will fit. super theif stock them
should be onlt $100???

dont have to buy many i rebuild them!

cheers phil.

there are 5 new ones of mine in a container in brissy! :roll:

8) ok , thanks guys, i am actually after the jigger that is driven by the fan belt and allows the engine driven fan to slip

The bit I'm talking about is the viscous fan hub. Check the Davies Craig website for details. Look under Range Rover commercials. I also assume that your Disco gas a serpentine belt.

hth a bit more.

Pete

Have you tried your local dealer?

I paid about $220 inc GST for a genuine part about 12 months ago

p/n ERR 3443 Viscous Fan Coupling

drove around for a month without it, temp guage didnt move, didnt try offroading though :wink:

Greg

8) well thats the ticket, the err 3443 seems to be the thing,
and our sponsor has it for $352 anabit, but as we all need to control the outgoings i am wondering if the other option is cheaper and does the same job.
pierre, i will check dc site, thanks,and yep serpentine, thank god!
thanks dw phil, nup not them. [by the way, you're wheel bearing problem nearly got me, must service wheel bearings after dunking]

Harry,
Thanks for bringing the price of ERR3443 to my attention. This is a price from long ago and needs to be changed, not enough hours in the day to keep up with everything on the website. Our current price on ERR3443 is $251.90.
If anyone one sees a price that is higher than our competitors please let me know.

Regards

Alan Howard

www.british4wd.com