Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 73

Thread: Disco2 problems

  1. #51
    Join Date
    Dec 2016
    Location
    New Lambton, NSW
    Posts
    698
    Total Downloaded
    0
    Quote Originally Posted by revird View Post
    Great info guys, but starting to lose the thread a bit, still trying to work out the problem, mrs spoke to a guy from a land rover specialist in lonsdale, he seems to think it isn't the MAF, she says he named a few other things but she forgot to write them down, so I'm still stuck.
    Just posting this here from another computer

    LEMO13.xlsx

  2. #52
    Join Date
    Dec 2016
    Location
    New Lambton, NSW
    Posts
    698
    Total Downloaded
    0
    Quote Originally Posted by revird View Post
    Great info guys, but starting to lose the thread a bit, still trying to work out the problem, mrs spoke to a guy from a land rover specialist in lonsdale, he seems to think it isn't the MAF, she says he named a few other things but she forgot to write them down, so I'm still stuck.
    So did you replaced the crap eBay unit MAF? You said the original was working but not 100%.... What reading were you getting and did you take a input fuelling log and can you post this so we can have a look? (I did another post to show what readings you get)

    Let us know what the mechanic said, can you give them a call to find out? might shine some light on what else we may be able to assist with??

    Cheers Lemo

  3. #53
    Join Date
    Jan 2018
    Location
    Mid North South Australia
    Posts
    25
    Total Downloaded
    0
    Quote Originally Posted by Lemo View Post
    So did you replaced the crap eBay unit MAF? You said the original was working but not 100%.... What reading were you getting and did you take a input fuelling log and can you post this so we can have a look? (I did another post to show what readings you get)

    Let us know what the mechanic said, can you give them a call to find out? might shine some light on what else we may be able to assist with??

    Cheers Lemo
    I can't remember what djam1 said was the reading from my original MAF, he said it was not 100%, the suppler refunded my money and doesnt want the MAF back.. "input fueling log" I have no idea, djam1 was incontrol of his nanocom, I was watching as close as I could. Maybe he can answer that for you?

    I rang the mechanic, he said disconnect the Glow Plug Relay, (it is not needed in this country anyway) took some searching to find it, but I think its R6 in the fuse box, I have removed it, will try it out tomorrow morning when it is cold..

  4. #54
    Join Date
    Nov 2014
    Location
    Nirvana near Albany W.A.
    Posts
    2,480
    Total Downloaded
    0
    Which year is the vehicle?, in the morning when its cold turn the ign on without starting and listen to the fuel pump, can you hear any cavitation sounds or is it an even thrum ?
    You can rule out glow plugs

  5. #55
    Join Date
    Jan 2018
    Location
    Mid North South Australia
    Posts
    25
    Total Downloaded
    0
    Quote Originally Posted by discorevy View Post
    Which year is the vehicle?, in the morning when its cold turn the ign on without starting and listen to the fuel pump, can you hear any cavitation sounds or is it an even thrum ?
    You can rule out glow plugs
    2002 Discovery2

    I replaced the fuel pump, I hear it for about 20 secs then it goes quiet, if i don't start the engine.

  6. #56
    Tombie Guest
    Your lack of drive is transmission related.
    Was it happening prior to the oil and filter change?

  7. #57
    Join Date
    Jan 2018
    Location
    Mid North South Australia
    Posts
    25
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    Your lack of drive is transmission related.
    Was it happening prior to the oil and filter change?
    Yes it was happening before, thats why the oil and filter were changed, what makes you think transmission?

  8. #58
    Join Date
    Nov 2014
    Location
    Nirvana near Albany W.A.
    Posts
    2,480
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    Your lack of drive is transmission related.
    Was it happening prior to the oil and filter change?
    My lack of drive in the mornings is more age related. can be sorted with a couple of coffees
    Revird, does it feel like it is going into gear in the morning, if yes then you need to sort out that the maf and associated wiring is OK , if not then on an eu3 engine ( which yours is ) there will be a delay in throttle response every time you start it . if its only doing it when the car has been sitting for a while it can point more to injector washers etc, but we need to establish if it goes in to gear first

  9. #59
    Join Date
    Mar 2015
    Location
    Horsham Victoria
    Posts
    724
    Total Downloaded
    0
    Have you done injector washers, wiring harness, oil in ecu?

  10. #60
    Join Date
    Jan 2018
    Location
    Mid North South Australia
    Posts
    25
    Total Downloaded
    0
    Quote Originally Posted by RobMichelle View Post
    Have you done injector washers, wiring harness, oil in ecu?
    Yep, all clean, no oil in harness. or in cpu end.

Page 6 of 8 FirstFirst ... 45678 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!