<div class='quotetop'>QUOTE</div><div class='quotemain'>Start with the Boge Strut[/b][/quote]
It's gone. Ooops, that's right I'm meant to be out in the shed. Ok Mum! https://www.aulro.com/afvb/
But I have to have lunch some time.
Printable View
<div class='quotetop'>QUOTE</div><div class='quotemain'>Start with the Boge Strut[/b][/quote]
It's gone. Ooops, that's right I'm meant to be out in the shed. Ok Mum! https://www.aulro.com/afvb/
But I have to have lunch some time.
Yep, that's the way :twisted: :twisted: :twisted: :twisted: :twisted:Quote:
Originally posted by mickrangie
dont need spanners for that.... 10" grinder will fix it quick smart https://www.aulro.com/afvb/
You have a 93 Rangie, there isn't one you lucky sod https://www.aulro.com/afvb/
Trav
Everything I could do is now done.
All the LRA hardware is on and the front springs are in. Now I just have to pick up the shocks and rear springs. It's a bit of a worry at the moment because I now have 150mm at the front bumpstops which i think ie equicilent of a 4" lift......I only want 2". I am hoping that when I take it for a test drive it will all settle down. :?
I thought you were all just joking about the angle grinder on the boge strut but when I went to take it off there was no way could get the thin nut holding in the ball joint loose........so I cut it off with the angle grinder. :twisted:
I dont joke!! they can get pretty hard to get off sometimes and the grinder is just the easy way out!!
so where are the pics?
<div class='quotetop'>QUOTE</div><div class='quotemain'>I now have 150mm at the front bumpstops [/b][/quote]
8O whenI first put in the Rangie Spares 'purples' (220lb) in the front of the 'fender it was only 120mm, and they measured a bit over 17" tall free length !
If that's the case then they should settle down when I drve it. The springs I put in were 160lb and measured about 16.3" free length.
Either that or Browns springs have stuffed up and they are heavier than 160lb.
they all settle down then it will lean to the rhs :x
I don't think the early Rangies had the problem with the lean. On the early ones the steering box is on ones side and steering pump on the other which I think helped even up the weight. (Or maybe I'm just making it all up).
On my Disco's I have alway had Brown Springs make one spring 10mm longer than the other.
Man those springs are light!
Should flex well though.
https://www.aulro.com/afvb/ https://www.aulro.com/afvb/ I hope so.
The are actually heavier than what was in there. It had 150lb springs in there before which is amazing that it had ultra light spring in the front and ultra heavy (340lb) springs in the rear.
I guess if it stays at 4" lift then I have less chance of bottoming out with the light springs. https://www.aulro.com/afvb/ . I just won't have nay steering. :cry: