Just get a 20L plastic drum drum and cut the side out of it. That way you can pour the old oil into a waste container through the original screw cap hole.
No Mess 8)
Bushie
Printable View
Just get a 20L plastic drum drum and cut the side out of it. That way you can pour the old oil into a waste container through the original screw cap hole.
No Mess 8)
Bushie
Excellent: it is in the commons threads section https://www.aulro.com/afvb/Quote:
Originally posted by Bushie
Just get a 20L plastic drum drum and cut the side out of it. That way you can pour the old oil into a waste container through the original screw cap hole.
No Mess 8)
Bushie
worst job is the rear sedimentor on the Tdi - I refuse to break the little plastic tap, so use a 11mm spanner and take the complete bowl off for a good clean out.
I did this yesterday and got the diesel running down my arm onto my chest!!!
LRH
You remind me that it is a few years since I did this. 8OQuote:
Originally posted by LRHybrid100
worst job is the rear sedimentor on the Tdi - I refuse to break the little plastic tap, so use a 11mm spanner and take the complete bowl off for a good clean out.
I did this yesterday and got the diesel running down my arm onto my chest!!!
LRH
I have a replacement tap some where?
<div class='quotetop'>QUOTE</div><div class='quotemain'>I have a replacement tap some where?[/b][/quote]
the thread is 5/16 UNC. I replaced mine with a stainless socket head cap screw I had sitting on the shelf (it was supposed to be for the extractors on the race car...)
Hey guys - has anyone had any experience with those cool looking oil drain gizmos? Can they get trashed if you are in the muck off road?
What are they worth?
Cheers,
Cameron
I've got one in the shed, just not fitted it yet :oops:
LRH