Results 1 to 8 of 8

Thread: Fluid Transfer Pump

  1. 23rd April 2006, 06:56 PM #1
    matbor's Avatar
    matbor
    matbor is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Upwey, VIC
    Posts
    2,012
    Total Downloaded
    0

    Fluid Transfer Pump

    After one of these Fluid transfer Pumps, and the ones at Repco are expensive, anyone know where I can get one from ? need to change the oil in my diffs.

    <div class='quotetop'>QUOTE</div><div class='quotemain'>


    http://www.difflock.com

    0.5 Litre Fluid Transfer Pump Dual Inlet Outlet

    If you've ever bought a so-called oil and fluid transfer pump, the chances are you will have been disappointed when you found out it couldn't cope with thicker oils like EP90, or that it's plastic barrel and components quickly wore out or failed.

    This extremely well designed and constructed transfer pump is manufactured in steel with seperate inlet and outlet valves, a far cry from those cheap and nasty, inferior plastic pumps.

    This pump incorporates a double-shaped seal for improved pumping effectiveness, will transfer a 1/2 litre per stroke, and is suitable for transferring a wide range of fluids and lubricants, including viscous oils such as EP90.

    Supplied with two hoses, one inlet and one outlet, each over 1 full metre in length.[/b][/quote]
    Reply With Quote Reply With Quote
  2. 23rd April 2006, 08:47 PM #2
    rick130's Avatar
    rick130
    rick130 is offline Moderator Gold Subscriber
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    I've a stirrup pump which I never use, a smaller suction pump thingy that holds about 600ml with a plunger tube (like a syringe) on one end and a 1/2" x 600mm (like the mix up of measuring systems ) clear hose on the other, it leaks and makes a mess, or last Monday I changed the diff oil in the Patrol by using those little 1 litre bottles that Castrols lubes come in with the pull up spout. Saves me mucking around with my pumps and making a bloody mess
    Reply With Quote Reply With Quote
  3. 23rd April 2006, 10:05 PM #3
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Hi Mat
    You need a "Tom Thumb" pretty sure STC make them.Its a bottle,around 1 litre in capacity,with the same pump setup as a 20L drum pump,around $20.Can buy them over here in WA from a filter supply mob,if you cant find one yell out I will find their contact no.
    Goodluck
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  4. 24th April 2006, 10:16 AM #4
    ATH
    ATH is offline YarnMaster
    Join Date
    Sep 2007
    Location
    Ocean Reef WA
    Posts
    3,098
    Total Downloaded
    0

    Fluid pumps.

    I bought a Tom Thumb on Andy's recommendation and it works well. Changed the Defenders gearbox oil again in an attempt to get smooth changes and didn't spill a drop.
    Didn't get smooth changes either!
    AlanH.
    Reply With Quote Reply With Quote
  5. 24th April 2006, 10:44 AM #5
    matbor's Avatar
    matbor
    matbor is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Upwey, VIC
    Posts
    2,012
    Total Downloaded
    0
    What do they look like, any pics ? or any one know where I can get one in Melbourne ?

    Matt.
    Reply With Quote Reply With Quote
  6. 24th April 2006, 10:51 AM #6
    disco_ute's Avatar
    disco_ute
    disco_ute is offline Master
    Join Date
    Jan 1970
    Location
    Melbourne - Eastern sector
    Posts
    963
    Total Downloaded
    0
    Tom Thumbs rock!!

    I have 2 one for ATF and the other for Diff oil!!

    I got mine at autobarn

    Mick
    Reply With Quote Reply With Quote
  7. 24th April 2006, 10:55 AM #7
    disco_ute's Avatar
    disco_ute
    disco_ute is offline Master
    Join Date
    Jan 1970
    Location
    Melbourne - Eastern sector
    Posts
    963
    Total Downloaded
    0
    found it



    http://www.stm.net.au/index.cfm?fuseaction...il&productID=57

    Mick
    Reply With Quote Reply With Quote
  8. 24th April 2006, 11:02 AM #8
    matbor's Avatar
    matbor
    matbor is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Upwey, VIC
    Posts
    2,012
    Total Downloaded
    0
    Awesome, will go get one.

    Thanks
    Matt.
    Reply With Quote Reply With Quote
« Puff of smoke around 300tdi turbo/exhaust only at startup? | Oil+filter+bio-diesel »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!