Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 28

Thread: RV8 Starter Motor

  1. #11
    Join Date
    Apr 2007
    Location
    NW Tassie
    Posts
    1,884
    Total Downloaded
    0
    Quote Originally Posted by Old Farang View Post
    Perhaps you mean a 12 volt battery? If you put a 12 volt starter on 6 volts I doubt that it would spin very fast.
    that's what I thought I put, mind somewhere else .
    cheers
    blaze

  2. #12
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,474
    Total Downloaded
    0
    On this line of thinking, it has been discussed elsewhere to just put a 12v starter in and run it on 24v - zoom zoom.

    Now I would put my 24v solenoid so that would be OK and the thought is that given the heavy duty nature of the wiring (the wiring in my 12v armature looks the same as wiring in the 24v armature) and the short duration of use when starting a 12v starter might be OK.

    Any thoughts?

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  3. #13
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,474
    Total Downloaded
    0
    Quote Originally Posted by Old Farang View Post
    The armature core is very shiny for one thing,
    That is as it is supposed to be - is a "chrome" finish rather than the usual copper finish.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  4. #14
    Join Date
    May 2012
    Location
    Wannanup WA
    Posts
    1,477
    Total Downloaded
    0
    Quote Originally Posted by 101RRS View Post
    That is as it is supposed to be - is a "chrome" finish rather than the usual copper finish.

    Garry
    No, I am referring to the laminations of the armature core, not the copper windings. With the age of it the only way it will have a "polished" appearance is by rubbing on the pole pieces. Have you checked how worn the bushes are? The only way those marks that appear on the top of the commutator risers got there is by rubbing on something. If a brush had got "stuck", then there would be burnt flash marks where it attempted to conduct current across what would have been a small gap to start with.

    The 12 volt solenoid will work on 24 volts, but probably get very hot very quickly. But you posted that you have some NOS solenoids, so aren't they 24 volt? Also, what about just using the spare 12 volt armature to rebuild the 24 volt starter. Not sure what the difference in resistance is, more than likely the main difference is in the number of winding turns in the field poles, rather than much difference with armature resistance.

  5. #15
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,474
    Total Downloaded
    0
    I contacted AJ in Melbourne and he does not have any 24v starters but he does have new 24v armatures for a good price.

    So as the stator and its field windings all look OK - I am going to put the new armature in, clean up the good 12v cap with its good brushes and put it all together.

    I have tested the bearings and they all seem good with no excess movement.

    We will see.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  6. #16
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,474
    Total Downloaded
    0
    While the brushes I have are probably OK I think I should put in a new set. However the brushes are the early Lucas wedge style and I cannot find anyone who sells them. There are plenty of the post 86 Bosch style that are a rectangular/block style but not found any of the early Lucas style like in the pic below.

    Any ideas on who might sell these early wedge style starter brushes?

    Thanks

    Garry

    IMG_20190629_151007.jpg
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  7. #17
    Join Date
    May 2012
    Location
    Wannanup WA
    Posts
    1,477
    Total Downloaded
    0
    No idea where you might buy the correct brushes, but if you can find some bigger ones made from similar material, it is not a big job to shape them down to fit. What may be a bigger problem is find some with the correct leads and connection lugs. Many years since I worked on these things, but even back then we sometimes had to make up odd sizes.

  8. #18
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,474
    Total Downloaded
    0
    I have found out the early V8 starter bushes and the same as the starter bushes in a Series 3/2a (I assume 4 cylinder).

    Same as these Land Rover Series 2A, 3 Starter Motor Carbon Brush Kit - AAU1405 3863349461553 | eBay

    So I can buy from overseas - a search of Australian sites has not shown any - anyone know who might sell series 2a/3 starter bushes?

    Cheers

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  9. #19
    Join Date
    May 2012
    Location
    Wannanup WA
    Posts
    1,477
    Total Downloaded
    0
    Quote Originally Posted by 101RRS View Post
    I have found out the early V8 starter bushes and the same as the starter bushes in a Series 3/2a (I assume 4 cylinder).

    Same as these Land Rover Series 2A, 3 Starter Motor Carbon Brush Kit - AAU1405 3863349461553 | eBay

    So I can buy from overseas - a search of Australian sites has not shown any - anyone know who might sell series 2a/3 starter bushes?

    Cheers Garry
    Hmm, I guess you are getting sick of this project, but you have written BUSHES? I guess you mean BRUSHES? Have you tried Bare Co? I know they are tractor parts dealers, but they import a lot of odd parts and may know where if they don't have them.

    Bare Co - Home

    put AAU1405 into Google. All the usual suspects have them, but none of them mention fitting a 24 volt V8?


    the following has all the parts which may help finding the correct part number: Replacing Lucas


    Last edited by Old Farang; 6th July 2019 at 12:49 PM. Reason: add links

  10. #20
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,474
    Total Downloaded
    0
    Yes was just a typo - supposed to be brushes.

    All Fourx4 comes up when you google AAU1405 as having them in stock.

    Interestingly I was there on Wednesday after the brushes before I realised there were different starters. They initially gave me the newer Bosch type. Unfortunately like the dealers All Fourx4 have gone to Vin based searches and the brushes I wanted did not come up - they got the RRC parts book out and found the brushes but they were as a complete part with the cap and not carried. Further searches did not show anything.

    I guess I needed to know that the brushes were the same as those in the series 3 and point the search in that direction - I wanted to have a look up in their used old Landrover parts shelves that customers had access to but I was not able to do so.

    While I accept the buyers should have as much information as possible, it is not always possible.

    Thanks for your help - much appreciated.

    Cheers

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!