we fitted a parking sensor to a front end loader that was working in a confined space they seemed to work fine used to bits of metal with holes for the sensors welded on top of the counter weight (one large hunk of metal)
I am going to put a steel rear bar on my Disco D2. I have been informed that the parking sensors will not work on a steel rear bar.
Is this true or a wife’s tale![]()
If I have to remove the sensors for the steel rear bar where is the main parking sensor unit locatedso I can remove that and sell it.
If I could keep them that would be great as they are useful for dogging trees when in reverse, not just the car park at the shops.
Any help would be appreciated.
we fitted a parking sensor to a front end loader that was working in a confined space they seemed to work fine used to bits of metal with holes for the sensors welded on top of the counter weight (one large hunk of metal)
disco seriesII mods so far:-bullbar,hyd winch,
detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.
In the event of nuclear war,Disregard this message
<div class='quotetop'>QUOTE(LoadedDisco @ May 17 2006, 04:39 PM) Quoted post</div><div class='quotemain'>
Is this true or a wife’s tale![]()
[/b][/quote]
I thought that they were ultrasonic so metal should make little difference![]()
Mahn England
DEFENDER 110 D300 SE '23 (the S M E G)
Ex DEFENDER 110 wagon '08 (the Kelvinator)
http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html
Ex 300Tdi Disco:
Interesting info thanks.
I noticed this in general chat:
http://www.aulro.com/af/index.php'showtopic=11840
The steel Kaymar rear bar can accommodate them.
Mahn England
DEFENDER 110 D300 SE '23 (the S M E G)
Ex DEFENDER 110 wagon '08 (the Kelvinator)
http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html
Ex 300Tdi Disco:
Off topic slightly but can anybody recommend a good quality after market parking sensor kit.
I’d like to fit them front and rear on the RR.
Cheers.
<div class='quotetop'>QUOTE(drivesafe @ May 18 2006, 08:33 AM) Quoted post</div><div class='quotemain'>
Off topic slightly but can anybody recommend a good quality after market parking sensor kit.
I’d like to fit them front and rear on the RR.
Cheers.
[/b][/quote]
Hi Tim,
Jaycar have a two channel model.
www.jaycar.com.au
I have the surface mounted model on the rear of the disco but they also have a flush mounted version.
Sensor
Autobarn carry a more sophisticated version. I think it is a four channel model.
Mahn England
DEFENDER 110 D300 SE '23 (the S M E G)
Ex DEFENDER 110 wagon '08 (the Kelvinator)
http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html
Ex 300Tdi Disco:
Thanks Mahn, I’ll look into them.
Cheers.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks