Adding the final touches to my 1983 Manual RRC with a view to making it my daily.
Almost all the mech is now done and wiring is slowly being sorted as well as interior and she is stock height, stock exterior except for the dealer fitted rear step.
id like to replace the Seatbelt setup so I can upgrade the front seats (Seat mount belts to pillar mount) but the next step is to replace the older and somewhat worn Points distributor and resistance coil with a later electronic unit and 12 volt coil.

I prefer using OEM parts when available because they just work so my donor injected MY 85 3.5 RRC will provide the dizzzy and amp setup.
I have wired in new circuits for the starter and will also replace the ignition circuit adding 35 amp relays as needed and the starter motor is brand new (Well worth the cost) so how do I wire in the OEM electronic dizzy and what do i need from the donor to do this job?

Cheers