Installing San Hima (Clearview style) towing mirrors with indicator build in
G’day Forum members,
Once again reaching out for help/advice. I have purchased Sean Hima extendable towing mirrors (similar to Clearview mirrors but a lot cheaper) they have indicator capabilities in-built.
The S.H. are plug and play install for mirrors: wiring with 2 plugs attached coming from mirror housing, I am guessing one plug for the mirror the other for inductor. However, then indicators have to be wired in to the car system I am presuming. There is additional connector wiring supplied with plugs at one end bare wires at the other?
The original mirrors on my 2006 Discovery 3 SE did not have indicator capabilities there for I am presuming that there is no wiring within the door cavity already to be plugged into.
Regrettably, the S.H. mirrors did not come with written install or wiring instructions and none of the sellers of these mirrors have any say?
There are videos on the internet for mirrors install nothing for indicator connecting!
Can any one in the forum advise re wiring connection, the mirrors install seem not too complex- remove door card, unscrew current mirror, screw in new mirrors. But Wiring????
Thanks for any and all advice.
Cheers,
John
2006 D3 V6 petrol: much loved.
2004 D2 V8 petrol: missed, hopefully gone to a better place.
1996 D2 V8 petrol: gone, don’t know where or care.
Bookmarks