Hello All,
Just wondering whether just the series of fuel pipes that connect to form the spill rail - return pipe on the 200 TDI can be replaced?
All together the set is called part number: ERR3652 - Fuel Spill Rail Pipe for 200TDI.
Or is the spill rail fuel pipe something special other than the readily available diesel tolerant fuel line?
Kind regards
Lionel
-----
You have the right to remain silent. Anything you say will be misquoted, then used against you.
-----
1999 Disco TD5 ("Bluey")
1996 Disco 300 TDi ("Slo-Mo")
1995 P38A 4.6 HSE ("The Limo")
1966 No 5 Trailer (ARN 173 075) soon to be camper
-----
I just did mine on a 300tdi, presume they are the same on a 200. I got some hose from the local mower repair place, I got pretty yellow tube It just pushes on, very simple job.
Fattima & Donh54<
Thank you for your replies. After reading Donh's reply I went to one of the local diesel specialists and bought some new line. It turns out that it is the same flexible rubber hose with a cotton braided cover that Snowy had. The pipe's details are:
ABS DIN 73379/82 - 3.2 x 7.0 - B - 0/36 > NBR/CO<
From this code the size would be an inside diameter of 3.2 mm and an outside diameter of 7.0 mm - where "B" is the type of pipe.
Kind regards
Lionel
I used 1/8 hose on my 300tdi, tight fit but didn't need clamps and never leaked.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks