Results 1 to 5 of 5

Thread: 200 TDI Splil Line Return Rail Pipe

  1. #1
    Lionelgee is offline YarnMaster Silver Subscriber
    Join Date
    Mar 2010
    Location
    Bundaberg, Queensland
    Posts
    3,083

    200 TDI Splil Line Return Rail Pipe

    Hello All,

    Just wondering whether just the series of fuel pipes that connect to form the spill rail - return pipe on the 200 TDI can be replaced?

    All together the set is called part number: ERR3652 - Fuel Spill Rail Pipe for 200TDI.

    Or is the spill rail fuel pipe something special other than the readily available diesel tolerant fuel line?

    Kind regards
    Lionel
    Attached Images Attached Images

  2. #2
    Join Date
    Mar 2007
    Location
    Warwick Qld
    Posts
    1,982
    I used (by memory) 1/4 " rubber fuel line. Just pushes on. And if one piece is perished, replace them all.
    Quote Originally Posted by Lionelgee View Post
    Hello All,

    Just wondering whether just the series of fuel pipes that connect to form the spill rail - return pipe on the 200 TDI can be replaced?

    All together the set is called part number: ERR3652 - Fuel Spill Rail Pipe for 200TDI.

    Or is the spill rail fuel pipe something special other than the readily available diesel tolerant fuel line?

    Kind regards
    Lionel
    -----
    You have the right to remain silent. Anything you say will be misquoted, then used against you.
    -----

    1999 Disco TD5 ("Bluey")
    1996 Disco 300 TDi ("Slo-Mo")
    1995 P38A 4.6 HSE ("The Limo")
    1966 No 5 Trailer (ARN 173 075) soon to be camper
    -----

  3. #3
    Join Date
    Aug 2018
    Location
    Melbourne
    Posts
    288
    I just did mine on a 300tdi, presume they are the same on a 200. I got some hose from the local mower repair place, I got pretty yellow tube It just pushes on, very simple job.

  4. #4
    Lionelgee is offline YarnMaster Silver Subscriber
    Join Date
    Mar 2010
    Location
    Bundaberg, Queensland
    Posts
    3,083
    Fattima & Donh54<

    Thank you for your replies. After reading Donh's reply I went to one of the local diesel specialists and bought some new line. It turns out that it is the same flexible rubber hose with a cotton braided cover that Snowy had. The pipe's details are:
    ABS DIN 73379/82 - 3.2 x 7.0 - B - 0/36 > NBR/CO<

    From this code the size would be an inside diameter of 3.2 mm and an outside diameter of 7.0 mm - where "B" is the type of pipe.

    Kind regards
    Lionel

  5. #5
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    14,456
    I used 1/8 hose on my 300tdi, tight fit but didn't need clamps and never leaked.
    MY08 TDV6 SE D3- permagrin ooh yeah !
    98 TDI AUTO SE DISCO - gone and will be missed.
    2003 Dingo offroad camper trailer
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!