Td5 timing chain advice

H/B has arrived [emoji108] wow its flash haha. And heavy [emoji23] https://uploads.tapatalk-cdn.com/202...2d2c1d1df9.jpghttps://uploads.tapatalk-cdn.com/202...c3e0440c7f.jpghttps://uploads.tapatalk-cdn.com/202...71c794245b.jpg

Huh? ... you didn't order it in purple?? ....

[bigrolf]

The girl has paint, Arthur. :twisted:[biggrin]

Haha it will go nicely with the other purple bits and match my wheelchair [emoji38]

Just put the harmonic balancer on [emoji108][emoji108] bolt needs torqued up but least this bit is now on!!! Looks fab haha.
Want to clean a heap of areas but battery half flat now that boot won't open [emoji28] and degreaser is in the boot.
https://uploads.tapatalk-cdn.com/202...749e8a8b31.jpghttps://uploads.tapatalk-cdn.com/202...0d24a4be23.jpghttps://uploads.tapatalk-cdn.com/202...4ebd43498c.jpg

Gettin there, you'll be driving again by the weekend. :banana:
Is the paint high temperature tolerant ?

Just need the bolt torqued which when I rang kennards hire, ended up finding help which just waiting on them to call me back now that it's on and ready to torque. Basically got assistance of a big torque wrench [emoji1696] all being well.
Haha it sure is high temp paint

Hopefully have my car back by end of the week [emoji1696][emoji1696][emoji1696][emoji1696][emoji1696][emoji1696][emoji1696]

Quote:

---

Originally Posted by V8Ian

Gettin there, you'll be driving again by the weekend. :banana:
Is the paint high temperature tolerant ?

---

Quote:

---

Originally Posted by Epic_Dragon

...... Basically got assistance of a big torque wrench [emoji1696] all being well.
......

---

Did you order the tool to hold/remove the balancer, when you ordered the balancer?

Very highly recommended you DON'T use the timing pin to reinstall the balancers' bolt back up.

there is a lot of torque going through the crank when you do it up again.
The balancer needs to be held against something hard whilst the bolt is being done up.

Quote:

---

Originally Posted by Epic_Dragon

Just need the bolt torqued which when I rang kennards hire, ended up finding help which just waiting on them to call me back now that it's on and ready to torque. Basically got assistance of a big torque wrench [emoji1696] all being well.
Haha it sure is high temp paint

Hopefully have my car back by end of the week [emoji1696][emoji1696][emoji1696][emoji1696][emoji1696][emoji1696][emoji1696]

---

vvvvvvv That

Quote:

---

Originally Posted by AK83

Did you order the tool to hold/remove the balancer, when you ordered the balancer?

Very highly recommended you DON'T use the timing pin to reinstall the balancers' bolt back up.

there is a lot of torque going through the crank when you do it up again.
The balancer needs to be held against something hard whilst the bolt is being done up.

---

If you dont have a manual, the other trick you can do is (and it sucks but you gotta) pull the starter so you can get onto the flywheel and then use the TC mounting bolt as an anchor against the casing. by putting a long socket onto it and bracing it.

great work

Best of luck with it...

I don't have the actual tool but have a home made one that does the job :)