Results 1 to 9 of 9

Thread: FENDER extra wiring in dash what's it for?

  1. #1
    Join Date
    Jan 1970
    Location
    near Kilmore central Vic but work in Melb every day :(
    Posts
    359
    Total Downloaded
    0

    FENDER extra wiring in dash what's it for?

    playing with my "new" 96 fender on the weekend I pulled apart the dash below the radio to work out the fitting of my gauges (see other post )
    and begged me to ask the question whats all the extra wiring in there for?
    anything useful?
    where does it go?
    what does it do (O/S models??)
    there's more wiring in there than in the whole rest of the car
    just curiuos

    Jase

  2. #2
    Join Date
    Jan 1970
    Location
    Toowoomba QLD.
    Posts
    1,179
    Total Downloaded
    0
    They appear to make a "one size fits all" loom for all the models. Pay more $$$ and they will hang something extra off the spare plugs and terminals. probably keeps the cost down if you do not mess around with different models. Wire is relatively cheap these days, and it is a very light gauge so copper content is low.

    Trev.

  3. #3
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    they are for overseas models as you suggested....they have heated seats and mirrors....
    more light switches....power windows.....air conditioning....and all sorts of other goodies....
    depending on the model.......

  4. #4
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    they have heated seats (so are mine when i fart) and mirrors....(yep got them too!)
    more light switches....power windows(got them also).....air conditioning.(that too!)...and all sorts of other goodies
    ..(have you not seen my bling??)..
    depending on the model.......

    should have just bought a newie

    phil

  5. #5
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    what...you got heated mirrors...?

  6. #6
    Join Date
    Jul 2006
    Location
    Rydalmere, Sydney
    Posts
    227
    Total Downloaded
    0

    My 96 130 defender has heaps of spare copper!

    I got bored and looked behind dash- heaps of spare connectors.

    then behind little 3 switch panel- more spare connectors.

    Then behind panel below radio- more spare connectors.

    looked behind left rear light panel where brake, reverse and indicator lights are and -more spare connectors.

    lastly looked behind right rear light panel where brake and indicator lights are and you guessed it even more spare connectors.


    Anyone have a wiring diagram as to what colours go where?

    I want to put in rear fog lamps, tachometer, front fog/driving lights, second interior light etc

    James
    zwitter

  7. #7
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    give me your email address and i will see what i can find that may help....
    also.....what engine does it have...?

  8. #8
    Join Date
    Jan 1970
    Location
    Toowoomba QLD.
    Posts
    1,179
    Total Downloaded
    0
    When you buy an Extreme you get most things.
    I don't have the heated windscreen, mirrors, or seats. (This is Queensland, not the Arctic).

    Other wires are probably for Sat Nav, front fog lights, ejection seats, missile lock, HUD, landing gear, JATO bottles.

    You can get your Jolie's off in these things!

    Trev.

  9. #9
    Join Date
    Jan 1970
    Location
    near Kilmore central Vic but work in Melb every day :(
    Posts
    359
    Total Downloaded
    0
    sorry should have mentioned mines a 96 130 as well (same as zwitter's and tdi is the only engine avail, well here anyway)
    maybe they used a bigger wiring loom in the 130 as it had the carrying capacity
    saying that it's the most basic model feature wise (remember it is a fender not RR) , apart from rear window wiper I couldn't think of options on wagons a ute wouldn't get
    I'd also love w copy of wiring diagram, is it on Rave CD, I've got one but haven't looked at the wiring section, I also want to add lots of goodies and thought I could save running some wires by using spares in the factory loom
    thanks
    jase

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!