O/head Console

Quote:

---

Originally Posted by discowhite

how did you do yours ray?? mine are still on the kitchen table:(

---

On the bench, a nice sharp knife to cut away the foam you do not need (about 1" from memory), and a hack saw blade to cut the wire rod strengtheners. Now to get them retrimmed one day. Glad to see I am not the only one who has not recovered them Ray.:D

Sorry you asked Ray the question and obviously I am not Ray but have done the same.

As I have lifted my seats too, when I do go to get them recovered I am going to take 1" off the bottom edge as well, as it is difficult to see underneath them and your eyeline is right wher they come to.
Cheers
Craig

Quote:

---

Originally Posted by DirtyDawg

Good point in fact be careful of any item loose in the car as well, when I laid the Disco over the streetmap book hit me from the passenger door pocket.spine first. Lets face it who means to roll their car:eek:

If Tomby rolled his I don't know what I would use first if he was unconscious Socket set,first aid kit,socket set, first aid kit..aargh descisions descisions:D:D:D:D;)

---

LMAO.....

"Tomby" :twisted:

Quote:

---

Originally Posted by tombraider

nonononononono

Dont use tin!!!!

In a rollover etc, your head will NOT approve of tin that close by!

Plastic/Balsa wood is bad enough, tin is just fatal :cool:

Cheers
Tombraider

---

Let me explain the TIN idea.

I did suggest tin laminated with closed cell foam or rubber and then vinyl, which would make it softer than the Land Rover dashboard, what's more, tin would bend if you struck it with your head - timber wouldn't.

Plus the tin stucture would be lighter and not pack as much of a punch as a timber one. The shape I suggested bending it would also not leave any sharp edges.

Also in a catastrophic accident the tin will bend and fold onto itself, the timber would snap and there'd be shards.

Another storage option would be a dash mat with pockets / pouches on the top and velcro straps to hold their contents in. There's no lethality in the mat and the contents can be secured. If you have a sewing machine and some marine / auto carpet (the fibrous type that doesn't show stitch marks and can be cut into any shape) you could make one very cheaply. - But that's not an overhead console, so I'll shut up now.