A hammer, a sharp chisel (not your own) does the job, also taking the steering wheel off makes it a lot quicker
![]()
Hello Timberwolf if u only want to get out the actual key barrel then only undo the right hand bolt, under that will be a small screw to remove once this is out or loose the barrel will come out same side as u put the key in, then get another barrel or get yours fixed
Brad![]()
Range Rovers Have Charactors inside them
LROCWA Ex member 23 years
1971 Series 2A
2004 Discovery2a V8 Auto
2003 Discovery2a TD5 Manual
1982 4door man (sadly now gone)
1989 Vogue auto
2011 TDV8 Vogue
What would life be without a Rangie?
A hammer, a sharp chisel (not your own) does the job, also taking the steering wheel off makes it a lot quicker
![]()
Once you do get it off, hopefully the locksmith in town is a good one and can replace the barrell. Oakleigh Locksmiths here in Melb are old hands at em. (after Toorak they went to the poorer 'burbs)![]()
Thanks for your help guys. The bolts came out quite easy. I'll pinch the one out of my other Rangie, this one was a bit worn for my liking. And it doesnt have half a key stuck inside it.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks