prop shafts

**weeds** · 24th October 2006, 04:11 PM

chasing the land rover part numbers for the front and rear prop shafts for a 95 defender

**p38arover** · 24th October 2006, 04:20 PM

110? 130?

Got a VIN just in case?

I'll look up the parts catalogues on my PC.

Ron

**p38arover** · 24th October 2006, 05:55 PM

Originally Posted by weeds

VIN MA96nnnnn
110

I was right, the part nos. did change.

Front FRC8386 from MA939976

Rear FTC3905 from, I assume, LA930435 (the earlier part no. was for up to KA930434)

Ron

**weeds** · 24th October 2006, 06:33 PM

thanks Ron

**Outlaw** · 26th October 2006, 11:10 AM

While we're on prop shafts of 96 model defenders... what other model landies have an interchangable one with the front... i kinda screwed mine up on the weekend and need to replace the whole thing.

Do rangy or disco or series 3 ones fit?

**V8Hybrid** · 26th October 2006, 11:51 AM

Hi
The FRC8386 (front shaft) is used on Disco S1 and classic rangies as well.

**Outlaw** · 26th October 2006, 12:06 PM

Originally Posted by V8Hybrid

Hi
The FRC8386 (front shaft) is used on Disco S1 and classic rangies as well.

good to hear... thats a cheaper option for a replacement if can pull off my rusted out rangy

**weeds** · 26th October 2006, 12:07 PM

how close are the prop shafts off a county with 3.9 fitted

**DEFENDERZOOK** · 26th October 2006, 08:43 PM

Originally Posted by Outlaw

While we're on prop shafts of 96 model defenders... what other model landies have an interchangable one with the front... i kinda screwed mine up on the weekend and need to replace the whole thing.

Do rangy or disco or series 3 ones fit?

the shafts should have the part number stamped on one of the ends of the shaft.....
but you need to clean all the muck off to see it......

you can double check which shaft you have......

Thread: prop shafts

Thread Tools

prop shafts

Bookmarks

Bookmarks

Posting Permissions