Need info on parking sensors

**ladas** · 26th October 2006, 04:38 PM

Originally Posted by drivesafe

Thanks folks, ladas, I had a look and could only find a set for $70. Is this the same type you have.

I will have a look at the other locations, DSE and so on.

I’m actually only interested in the type that beep because to run cable from the back of the RR is a bitch of a job

If you don't want to run it to the front of the car, and just have a beep, then this should do the trick.

http://cgi.ebay.com.au/REVERSE-PARKI...QQcmdZViewItem

**drivesafe** · 26th October 2006, 04:43 PM

But that’s what the technology is there for, to improve your abilities and more importantly, to make life easier.

Now where did I leave my tampons?

**drivesafe** · 26th October 2006, 04:49 PM

Thanks ladas, but I like the first ones you posted for the same reason you did.

NO HOLES NEEDED.

Thanks again mate.

BUGGER, just backed into a tree cause I didn’t reset the mirror after I put my lipstick on.

Oh well, us girls will be girls.

**ladas** · 27th October 2006, 12:41 PM

Originally Posted by drivesafe

Thanks ladas, but I like the first ones you posted for the same reason you did.

NO HOLES NEEDED.

.

Unfortunately the only one I can see which is similar to mine is 24v.

However there is always another way - just make up some small brackets, L shaped with a big hole for the sensors on one face and two small screw holes to mount the bracket onto the underside of the bumber - spray the brackets black or your car colour .

Very basic sketch attached

You could also alter the angle of the L to suit the profile of your rear bumber

The brackets would only need to be fractionally larger than the sensor themselves so they wouldn't be too obvious.

Ladas

**drivesafe** · 27th October 2006, 02:15 PM

Thanks Ladas, looks like I will have to make something up as per your diagram.

Cheers.

Thread: Need info on parking sensors

Thread Tools

Bookmarks

Bookmarks

Posting Permissions