First three fan speeds dont work

Just out of curiosity.......

Since Im going in for surgery in about 5 weeks time and wont be able to do anything for about 3 days while Im on con leave how many of you would be interested in the modules IF I make em up for you?

to have a WAG at it you would probabley be looking at about $20 worth of additional parts to make it from a single speed controler into a variable controller with a remote pot on it...


From opening interpretation of the supplied wiring diagram earliers you will need to do the following to get it to work correctly....

1. Electrically insert the unit between the supply relay and blower motor.
2. Replace the fan speed control switch with a double pole single throw switch rated at at least 12v10a and the controlling resistor of the unit
3. install at least one extra earth.

the second part of the WAG would be youd get the lot for $50ish prior to postage and handling and depending on how hard it is to get to the loom maybe 90 minutes to install it.

Quote:

---

Originally Posted by ladas

Not sure of the price - but shouldn't be too expensive < $100.00

..........and it only takes 20 - 30 mins to do

Ladas

---

Hi Ladas, how do i get to the part and where under the dash is it? Do i need to pull anything off the dash to make an opening for access?

The only thing you have to remove (apart from the part itself) is the panel under the glove box on the passenger side.

From there it should all be plain sailing

While Dave is laid up for three days anyone want some revenge I can go visit and rough him up a bit:D:D:D:D
My Defender aircon switchs on the fan and blows but the compressor and the thermo fan don't do jack, the clutch doesn't engage but the pulley is turning..but being a brickie the heat don't bother me too much its the phuking flies that give me the ships.. I suppose I will just get some aircon person to look at it so he can tell me the comp is stuffed then off to the wreckers for a similar replacement...As LR will probably want Thousands for OME thing.

Quote:

---

Originally Posted by DirtyDawg

While Dave is laid up for three days anyone want some revenge I can go visit and rough him up a bit:D:D:D:D
My Defender aircon switchs on the fan and blows but the compressor and the thermo fan don't do jack, the clutch doesn't engage but the pulley is turning..but being a brickie the heat don't bother me too much its the phuking flies that give me the ships.. I suppose I will just get some aircon person to look at it so he can tell me the comp is stuffed then off to the wreckers for a similar replacement...As LR will probably want Thousands for OME thing.

---

It would be my guess that it's either

1.The fuse
2.The gas has leaked out causing the low pressure switch to disable the system
3.Faulty pressure switch
4.Loose connection/earth

At an ouside chance it may be the clutch itself - but they are pretty robust.

Ladas

Quote:

---

Originally Posted by ladas

The only thing you have to remove (apart from the part itself) is the panel under the glove box on the passenger side.

From there it should all be plain sailing

---

thanks, doesnt sound to hard, will get the part and fit it. Matt

awww too bad you want to rough me up Dawg, now I dont feel like offerring to regas and inspect your system when I do the aircon phase of my course...... :)

Hi, im looking for the speed switch that has burnt out...

it has a 5 wire connector, and 3 speeds + power off.

if you can help let me know, itd be great, this is off a 91/92 disco. :D

please see some photo's: (sorry about phone cam quality)

http://startists.tv/_image/DSC00319.JPG

http://startists.tv/_image/DSC00320.JPG

http://startists.tv/_image/DSC00321.JPG

haydent, there's a 91 Disco being wrecked at AMV. Give Greg a call on 03 9870 9904 for info if you wanted a used one.

Pete

thanks