Low range popping out of gear on fender

Quote:

---

Originally Posted by nornalup

.

Most of you suggest rolling whilst going between low and high. Unfortunately I use high for soft sand driving and if/when I get completly stuck on soft sand or a steep slope I select low, and by nature this means I am not moving, making it really hard to get into low.

---

I usually only select low range while stationary, I just maintain pressure on the lever while I slowly come off the clutch in 1st gear to ensure total selection.

Quote:

---

Originally Posted by nornalup

Thanks guys appreciate the advice.

Most of you suggest rolling whilst going between low and high. Unfortunately I use high for soft sand driving and if/when I get completly stuck on soft sand or a steep slope I select low, and by nature this means I am not moving, making it really hard to get into low.

---

ok try this one and see what happens.....
this is only usefull in a non stall start situtation... if you need instructions for a stall start procedure let us know.

you've stalled...
hit the clutch
select nuetral on the main box.
select low on the tcase
select required gear on the main box
restart engine
maintain effort on the tcase selector.
ease up on the clutch as you follow your the normal move off procedure.

If it keeps jumping out after this... you might have selector issues...