So if i were using Delvac in a stock 300tdi with standard filtration, how much longer could i extend the drain ?
Printable View
So if i were using Delvac in a stock 300tdi with standard filtration, how much longer could i extend the drain ?
too many variables involved, eg state of engine, trip lengths, etc.
In mine, I'm not comfortable going much past 15,000km, with the UOAs so far. I've gone 20,000km several times and it was OK, but 15,000 looks a little better for me.
Only real way to tell is used oil analysis, and for the average person, it's probably cheaper to use something like Delo 400 or Delvac MX and change every 5000km. I'm just partial to synths when turbo's are involved, particularly oil cooled only ones like the little Garrett on the 300Tdi and I flog the daylights out of my engine and it's had the fuelling upped, it's my work vehicle and needs to be reliable so I just use D1 and hang the expense.
The great thing with UOA is that you can pick up if somehing is astray, like a head gasket weeping. I just do one once a year now on all our vehicles. The other thing to remember is that one test is meaningless. A string of tests (at $35/test) needs to be done to establish a trend. All this adds up to $. Our vehicles do enough miles to justify the expense and we are getting it back on reduced oil and filter usage. The Patrol is five years old and just clicked over 225,000km. At one stage the missus was averaging over 60,000km a year, and an oil change every month under warranty was a pain.
I have a few UOA's to get done in a few weeks after I had a few weird ones a month or so back. I'm guessing it was BP's diesel fuel additive, but we won't know for sure till I re-test.
In the Patrol, we can easily exceed 20,000km and the oil has hardly broken into a sweat. It really looks like it could almost double that distance, but I'm in front financially (vs changing at 5,000km with dino) so out it goes. I'm guessing it's easier on the oil as
a) we now use ULSD here, so it desn't load up the oil with soot and sulfur which would tend to happen more with an indirect injected engine vs the direct injection in a 300Tdi.
b) it's a bigger engine so uses much less boost and doesn't get worked as hard.
c) bigger sump/oil capacity at 10.5 litres vs just under 7 for a 300Tdi
d)the missus drives it mostly and she's not as hard on the equipment :angel:
ok...now that its all clear...im totally confused......:eek: :confused: :confused: :confused: :eek:
2003 defender Td5......im currently using penrite HPR Diesel5.......
what other options do i have......is the penrite good for this engine....or would i better off using something else....?
i dont have any intention of selling the fender and upgrading.....i plan to keep it so i need to protect it as much as possible......
am open to all suggestions that actually have some back-up or proof.....not just hearsay....
does anyone have info for me......in english...?
the previous post are getting a bit too technical for my little brain.....:D
I hear ya DZ, i just want to know if i can extend the drain interval to 10k without risking damage, my disco is a dd and occasional offroader.
Stick with what you have, there are no facts out there to prove that what you are using isn't among the best that's available - I use Mobil 1 for the same reasonQuote:
Originally Posted by DEFENDERZOOK
Quote:
Originally Posted by loanrangie
im not too interested in extending service intervals.....but rather the overall life of my engine.....
according to land rover......i only need to service it every 20,000kms.....
Quote:
Originally Posted by ladas
i intend to.....but if mobil 1 is a better oil for example.....i will gladly switch over......
and is that mobil 1 specifically for diesels....?
Mobil 1 isn't specifically for diesels, but Diesels are listed as suitable for Mobil 1 amongst other things, but keeping in mind they also have the delvac range to promote. My dealer was putting in Mobil1 0-40, now it gets Mobil1 5-50.
The difference that I see with Mobil 1, and Delvac1/Penrite HPR, is that Mobil 1 has met the latest SM ratings, where the Delvac and HPR diesel have not but they are still excellent with an SL rating. The 5-50 range is also broader and suitable for a wider range of operating conditions.
easy peezyQuote:
Originally Posted by loanrangie
the Delvac range is diesel specific and SM for mixed fleet use. It uses a much more robust additive package than the petrol biased oils and meets the much, much more stringent API CI-4+ diesel rating and relevent ACEA ratings, unlike the CF rating of M1.Quote:
Originally Posted by Slunnie