sailsbury pinion oil leak

Quote:

---

Originally Posted by rangieman

ok got the flange off i had a 4 bolt puller id forgotten about:eek:

now ive got the flange off the pinion moves up down and sideways is this normal or is there dramas lurking there that i should attend to:angel:

---

After a few failed attempts myself I got this done by Fred Smith and only now- after 6 years it is starting to weep. It looks from above your next seal will fail pretty quickly, so I would look into it further.:(

thanks deejay and others well the bearing place reckon they can get the seal but it will take 2 days god i luv the country and if its the wrong one they tell me the same as the front how strange is that completely different diffs but the same oil seal

at worst im off to toorak tractors on friday for a seal :eek:

Quote:

---

Originally Posted by rangieman

thanks deejay and others well the bearing place reckon they can get the seal but it will take 2 days god i luv the country and if its the wrong one they tell me the same as the front how strange is that completely different diffs but the same oil seal

at worst im off to toorak tractors on friday for a seal :eek:

---

I've got an Army parts book, different looking seals and different part no's. Betcha they looked up Range rover or Discovery, All the same to them....:bangin:

i gave them the part no AAU3381 and thats a landrover part no

so thats what they went off

Quote:

---

Originally Posted by rangieman

thanks deejay and others well the bearing place reckon they can get the seal but it will take 2 days god i luv the country and if its the wrong one they tell me the same as the front how strange is that completely different diffs but the same oil seal

at worst im off to toorak tractors on friday for a seal :eek:

---

Unlikely to be the same seal, Landrover quote completely different parts numbers:

AEU2515 for the rear salisbury & FRC8220 for the rover front. Genuine seal for the salisbury is a crappy leather jobbie. There is an alternative proper seal that I *think* is AAU3381/2 which does a much better job. Call Karcraft in Sydney, they'll have them all in stock and get them out to you overnight.

Paul:)

how about measurements i rang the dude and he gave my this OD 80.26m
ID 47.62

now cause i mangled the seal getting it out the OD i cant get but the ID i just measured the flange and the seal is a little smaller which will do the job

now that pn i gave him AAu3381 brought up the seal he is getting me go figure:eek:

ok guys its finaly back together thanks to stuart at rovercrarft who emailed me with a part name

chicago rawhide (seal) #18891

2 days waiting for well known bearing place to get it in and then they didnt get it angry aint the word:twisted:

so i rang a little bearing place and lookout they had one in stock a hour latter its fixed :D

i went for a 10 minute drive and no leaks

thanks for all that supplied info

now i have the part # for my records