Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: Injector cleaner additives

  1. #11
    Join Date
    Oct 2006
    Location
    Boronia, Melbourne
    Posts
    607
    Total Downloaded
    0
    I would have thought de greaseser into an engine would have been a very bad thing. What with cylinders liking lubrication and such.
    Personally i wouldnt do it, diesels are prob a little better than petrol motors with lower rpms and diesel tends to lubricate the cylinder walls somewhat.

    I remember my best mates dad used to run kero through the motor of his 202 kingswood at each oil change....the car rusted into oblivion long before the motor gave out

  2. #12
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Quote Originally Posted by grumpybastard
    I remember my best mates dad used to run kero through the motor of his 202 kingswood at each oil change....the car rusted into oblivion long before the motor gave out
    Does that say more about the longevity of the engine or the fact that old Holdens rust really really well?

  3. #13
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    557
    Total Downloaded
    0
    So whats the go, do we add it or not and how often?
    TDi yes\no?
    TD5 yes\no?
    TDV6 don't need it, got's heaps of power!!

  4. #14
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,037
    Total Downloaded
    0
    I use the Chemtec one from time to time in my TD5, usually when it occurs to me that its not running its best - probably too long since a good drive. On these occasions I've got my the fuel consumption back to normal, but if its running well then I don't see any improvement in economy.

  5. #15
    Join Date
    Jan 1970
    Location
    Melbourne, outer South East
    Posts
    2,283
    Total Downloaded
    0
    I use the Moreys diesel additive. It may be just my imagination, but if I don't put it in I am sure the slug is more sluggish.

  6. #16
    Mudguts Guest
    sticking banana skins in the diff is another goldie oldie........with 2 diffs its pure Nirvana!!

  7. #17
    Join Date
    Oct 2006
    Location
    Boronia, Melbourne
    Posts
    607
    Total Downloaded
    0
    sticking banana skins in the diff is another goldie oldie........with 2 diffs its pure Nirvana!!
    At the price of bananas at the moment ...... well.....

  8. #18
    Join Date
    Jan 1970
    Location
    Adelaide Hills. South Australia
    Posts
    13,349
    Total Downloaded
    0
    Speaking of which................. bought some yesterday for $5 per kg. They were getting on a bit but were still fine for a few days. Still tasted bloody nice & like most has been months since I've had one (Banana, that is)

    Give me a yell if you would like the skins.

  9. #19
    Join Date
    Jan 1970
    Location
    Normanhurst, NSW
    Posts
    10,258
    Total Downloaded
    0
    On a recent 23,500km trip to the north and west of this great country of ours, towing a camper behind a 300Tdi Disco, I noticed fuel consumption dropping off after about 7000km's. One third of a bottle of Nulon Diesel Fuel Treatment added to the next tank and consumption was restored.

    During this trip, running conditions didn't vary much (flat roads, long hops between towns, same brand of fuel [Caltex] used throughout trip, relatively constant speeds etc.) so consumption comparisons throughout trip were good.

    It convinced me of the worth of regular treatment of this kind to keep
    injectors performing at their optimum.

    I now dose my 300Tdi Disco and Td5 Defender with Nulon every 2000km or every second fill.

    Other brands of additives no doubt have similar effects but I have the proven results with Nulon and have therefore stuck with it.
    Roger


  10. #20
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    72
    Total Downloaded
    0
    I use the chemtech stuff with every tank - about 20 ml. I keep the bottle bu the driver seat and it has one of those easy measure bottles. I bought my 300 tdi with 125k. at 300k the injectors were tested on one of those superexpensive testers. They were reinstalled as they came out - all within spec. I have now done 375k and still using Chemtech.

    I use Nulon in my oils (sump, gearbox, transfercase and diffs) - excellent stuff.

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!