I just stand on the grab handle then on the spare wheel.![]()
Ok
I need some answers from the brains trust
Who has a rear ladder fitted to get to the roof rack ( I'm a short ****)
what do you recommend?
where did you get them? &
How much were they.
also which ones to avoid
thanks
I just stand on the grab handle then on the spare wheel.![]()
I dont have a grab handle. Do you meen the loops on the rear crossmember
Yep.Originally Posted by stusgonesailing
Ron
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
I Had a gen Land Rover one.
It was great . Here is a pic of it on the 90
![]()
95 300 Tdi Defender 90
99 300 Tdi Defender 110
92 Discovery 200tdi
50 Series 1 80
50 Series 1 80
www.reads4x4.com
Well as Read90 showed the pic i may have a second Hand one Kicking around at the other unit...i need one myself but im sure there is 2 over there...will let you know...
Stuart
Originally Posted by stusgonesailing
I have the standard "short" ladder from LR, available from the Stealers as a Gen Accesory.
From memory it was in the low $200's fitted.
It works as it should, and I also use a set of Graeme Cooper Bumperettes(with Chequer plate on top) to get the first "leg up" onto the truck.
This setup works well for me, it's simple and effective.......
Picture tells the story......
![]()
Last edited by ciapek; 21st December 2006 at 11:34 PM.
Last edited by Mudnut; 22nd December 2006 at 10:46 AM.
Hmmmm.....if you wanna go that way, there's some very nice fold-flush when not needed ones made of cast alloy, also others in stainless.....a veritable plethora available!Originally Posted by Mudnut
![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks