Results 1 to 6 of 6

Thread: D1 Temp Sender

  1. 4th March 2007, 06:13 PM #1
    Andrewpv01's Avatar
    Andrewpv01
    Andrewpv01 is offline Master
    Join Date
    Jan 1970
    Location
    Oz
    Posts
    418
    Total Downloaded
    0

    D1 Temp Sender

    I am trying to get a new temperature sender for the Disco (95 V8).

    The one on mine is a small thread (8-10mm) and "bullet" type connector on top. Does anybody know what the part number would be?

    I have had the wrong one sent to me (part No. PRC8783) and I want to be able to give them the correct part number. This one has a much larger thread (15-18mm) and has a spade connection.

    Thanks
    Andrew
    Reply With Quote Reply With Quote
  2. 4th March 2007, 07:16 PM #2
    4bee's Avatar
    4bee
    4bee is offline Cynical Moi?
    Join Date
    Jan 1970
    Location
    Adelaide Hills. South Australia
    Posts
    13,349
    Total Downloaded
    0
    I fitted one last July. It was the "Sensor, Coolant Temp, ECU." P/N ETC8496.

    Wires 2 Green/Blue & Red/Black. Cost. Apx. $32



    **** Maybe the one you have is for the Temp Gauge? Wires 1 off, Green/Blue.

    Condenser Fan Thermostat is 2 wires. Black/Purple & Black. Located above the water pump.

    Probably the best way to ID them is wire colours.
    Last edited by 4bee; 4th March 2007 at 07:40 PM.
    Reply With Quote Reply With Quote
  3. 4th March 2007, 07:49 PM #3
    Andrewpv01's Avatar
    Andrewpv01
    Andrewpv01 is offline Master
    Join Date
    Jan 1970
    Location
    Oz
    Posts
    418
    Total Downloaded
    0
    Yes that's the one I want - 1 wire one for the temp gauge.This one is located on the inlet manoifold just to the right of the thermostat housing.

    I should probably replace the other one too though as it doesn't seem to turn the thermo fans on, but when I bridge the wires 1 thermo fan starts.

    Andrew
    Reply With Quote Reply With Quote
  4. 4th March 2007, 07:53 PM #4
    4bee's Avatar
    4bee
    4bee is offline Cynical Moi?
    Join Date
    Jan 1970
    Location
    Adelaide Hills. South Australia
    Posts
    13,349
    Total Downloaded
    0
    Sorry, can't help with those P/Ns. My one came from Coopers.
    Reply With Quote Reply With Quote
  5. 5th March 2007, 01:15 PM #5
    BigJon's Avatar
    BigJon
    BigJon is offline ForumSage
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Auto trans PRC8783. Manual trans PRC8003. Sensor which screws into the intake manifold.
    PRC3505 is a switch which screws into the thermostat housing.
    Reply With Quote Reply With Quote
  6. 5th March 2007, 05:17 PM #6
    Andrewpv01's Avatar
    Andrewpv01
    Andrewpv01 is offline Master
    Join Date
    Jan 1970
    Location
    Oz
    Posts
    418
    Total Downloaded
    0
    Thanks BigJon it looks like they sent me the right part then.

    What is the difference between the manual and auto manifold?

    I think mine might have the manual manifold on it because the part number for the auto you gave is the one I have (twice now)

    Thanks
    Andrew
    Reply With Quote Reply With Quote
« Temperature gauge | crank case pressure »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!