Thread: Milford Cargo Barrier Disco 1

Bugger!

SWMBO has just driven off or I could tell you exactly, Ron. Flat strap apx. 5mm thick.

Hole has a nut welded to the back & is the same as the 'Wingbolt', whatever thread that is.

If no further replies I will respond this arvo with length. Has a sort of concertina section in as well. Adjustment of some sort or a type of "shock absorber" ???????

Thanks 4bee. I wasn't sure if it was wavy or not seeing as the short strap is wavy.

Regards

Ron

I have those straps at home so I can measure them for you tonite ( if someone hasn't answered by then. )
I bought a 2nd hand Milford barrier last year but never go round to fitting it.
And yep they are wavy

Yep as stated wavy on one end (No nut).
Total length of bar - 485mm
Width - 25mm
thickness - 3mm
Hole centre- hole centre - 455mm

Hope this helps

The wavey bit is so they straighten in the event of an accident and the load hits with force.
However saying that the back is only 600mm or so long, my guess is that nothing could get up enough speed to straighten the waves

My home made jobbie has the top straps coming from the kids seatbelt/child restrant bolt holes supplied from the factory so I didn't have to drill holes.

Woo Hoo I Made MASTER

Originally Posted by JohnM

Yep as stated wavy on one end (No nut).
Total length of bar - 485mm
Width - 25mm
thickness - 3mm
Hole centre- hole centre - 455mm

Hope this helps

It certainly does! Thanks John, I'll make some up. The instructions say they bolt to the short straps (which already have the awavy bits so I don't know why the extensions also have them).

Ron

Not sure if we are on the same Tram here.

On my original Milford Extensions, there is a nut at the opposite to wrinkly end with extra wing bolts inserted so that the both straps can be fixed together to give the total required length. ie. You don't only use the Ext. strap, but add it to the other.

"Ding ding, move right down the centre please."

Originally Posted by 4bee

On my original Milford Extensions, there is a nut at the opposite to wrinkly end with extra wing bolts inserted so that the both straps can be fixed together to give the total required length. ie. You don't only use the Ext. strap, but add it to the other.

Yep, that was my understanding from the installation notes.

I must admit I was surprised by the 485 mm overall length of the extensions as I haven't tried the barrier in the forward position as yet to even attempt gauge the length required - otherwise I'd have had a reasonable (and close enough) idea of the distance between hole centres.

Ron