Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Series window channel replacement

  1. 27th April 2007, 11:41 AM #1
    Phoenix's Avatar
    Phoenix
    Phoenix is offline Swaggie
    Join Date
    Jun 2003
    Location
    Launceston, Tasmania
    Posts
    12,347
    Total Downloaded
    0

    Series window channel replacement

    Ok, who has gotten window channel replacements, for how much and from where?
    1994 Discovery TDi
    2004 Discovery 2 TD5
    2010 Discovery 4 TDV6
    1961, Series 2 Ambulance. 108-098 - Eden

    Registry of Ex Military Land Rovers Mem. 129
    Defence Transport Heritage Tasmania Member
    Reply With Quote Reply With Quote
  2. 27th April 2007, 12:28 PM #2
    kaa45's Avatar
    kaa45
    kaa45 is offline R.I.P.
    Join Date
    Apr 2007
    Location
    Clifton Springs, Vic.
    Posts
    841
    Total Downloaded
    0
    I got a kit on ebay from Gary at Classic Land Rover Parts in Sydney for $45.00 per window. It had top, bottom and side channel for the sliding glass and the seal strip between the windows. I bought 2 kits and postage was $15.00.
    Still haven't fitted them yet. PM me if you want his phone number.
    Reply With Quote Reply With Quote
  3. 27th April 2007, 12:57 PM #3
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    I have bought quite a lot over the years. I recall it cost about $15 per 6ft length - from FWD Motors, Fairfield Rd Brisbane.

    EDIT - and don't bother screwing it in - use quick drying sikaflex and just clamp everything in place until the sikaflex dries. Solves a lot of the rust problems that the screws cause.
    Reply With Quote Reply With Quote
  4. 27th April 2007, 02:25 PM #4
    UncleHo's Avatar
    UncleHo
    UncleHo is offline AT REST
    Join Date
    Oct 2003
    Location
    Godwin Beach Qld
    Posts
    8,688
    Total Downloaded
    0
    G'day Folks

    Are any of these kits using the Steel backed Bailey Channel, or are they the non backed ones, as I have 2 doors to do. Are the ones from FWD motors the original ones for the Series ?? Isuzurover ??


    cheers
    Reply With Quote Reply With Quote
  5. 27th April 2007, 03:33 PM #5
    Phoenix's Avatar
    Phoenix
    Phoenix is offline Swaggie
    Join Date
    Jun 2003
    Location
    Launceston, Tasmania
    Posts
    12,347
    Total Downloaded
    0
    Roverparts have a kit to do 2 doors for $44 which i'm enquiring about at the moment.

    I'm also asking four wheel drives about their kit for $22 and what it includes.
    1994 Discovery TDi
    2004 Discovery 2 TD5
    2010 Discovery 4 TDV6
    1961, Series 2 Ambulance. 108-098 - Eden

    Registry of Ex Military Land Rovers Mem. 129
    Defence Transport Heritage Tasmania Member
    Reply With Quote Reply With Quote
  6. 27th April 2007, 07:12 PM #6
    Gavo
    Gavo is offline Master
    Join Date
    Jan 1970
    Location
    Deception Bay
    Posts
    232
    Total Downloaded
    0

    window channel series vehicle

    I used the standard steel backed Bailey channel from M.R. Automotive in Radcliffe for the top and rear section.
    I matched up a rubber Bailey channel for the lower slide from my local Clarke rubber.
    I had replaced it with steel Bailey channel all round on other vehicles I have had and noticed the the lower channel had rusted out and started to rust out the door top. The screws the hold down the channel had rusted out.
    Using the rubber as I have totally eliminates the rattles, is easier to replace, will not rust and cheaper
    Last edited by Gavo; 27th April 2007 at 07:17 PM.
    Reply With Quote Reply With Quote
  7. 27th April 2007, 07:46 PM #7
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,554
    Total Downloaded
    0
    dunno, havent replaced on for years, I just order a new door top, paint it civvie colours and install that

    before you ask... No.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  8. 27th April 2007, 07:56 PM #8
    OLR-067's Avatar
    OLR-067
    OLR-067 is offline Master
    Join Date
    Jan 1970
    Location
    QLD
    Posts
    859
    Total Downloaded
    0
    I bought the one's from the mob in Melbourne...metal backed..forget the price.
    Reply With Quote Reply With Quote
  9. 28th April 2007, 07:44 AM #9
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,667
    Total Downloaded
    0
    Bailey channel is available from all the places mentioned. It is expensive for what it is though.

    I have used it from Four wheel Drives and from Clark Rubber.

    Gluing it in will help prevent rust but will cause problems next time. Make sure the drains are clear and kept clear.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  10. 30th April 2007, 08:33 AM #10
    Phoenix's Avatar
    Phoenix
    Phoenix is offline Swaggie
    Join Date
    Jun 2003
    Location
    Launceston, Tasmania
    Posts
    12,347
    Total Downloaded
    0
    Quote Originally Posted by Phoenix View Post
    Roverparts have a kit to do 2 doors for $44 which i'm enquiring about at the moment.

    I'm also asking four wheel drives about their kit for $22 and what it includes.
    Roverparts includes the metal backed bailey rubber but not the metal cap. Which metal cap are they refering to??

    Four wheel drives is for one door only. The channel is made with the metal strip in the middle.
    1994 Discovery TDi
    2004 Discovery 2 TD5
    2010 Discovery 4 TDV6
    1961, Series 2 Ambulance. 108-098 - Eden

    Registry of Ex Military Land Rovers Mem. 129
    Defence Transport Heritage Tasmania Member
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Flat plane cranks | FYRLYT......... »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!