Thread: Clutch Defender

Could be in the master or slave, any sign of leaks anywhere

Or could be the adjustment at the pedal.

Bad fluid, or air in fluid.

Could be master, slave or clutch fork. Most likely either master or slave - look for fluid leaks (slave from bell housing drain and master down pedal) If bleeding fixes it, or if fluid is low, it is hydraulics. The master cylinder can be faulty without leaking, and if it has only just started leaking it may not show yet.

John

Most likely to be the master cylinder (aluminium bore), the cast iron bore slave cylinder rarely gives trouble.

Thanks all,

topping up with liquid en bleeding did the job. We will see how long it lasts....

Cheers

Roel www.popadd.com/overlandy2006

Hi all,

after bleeding clutch, it seemed all fine. 2 days later clutch fluid was again low and therfore must be a leak. I replaced Master cylinder with the new spare I carried. After installing it, big leaks occured from bell housing drain, therefore must be the slave cylinder (??) Probably the new master cylinder buggered up the slave cylinder completely.

Can somebody confirm this and if this is the case, any idea how I can get a replacement slave cylinder to Exmouth?? It's Friday afternoon...
Would love some telephone numbers of companies/people who keep Defender Spare parts in WA.
Don't really want to drive to Perth without a clutch (although possible...)

Thanks a lot for your help.

Roel van Ulft
travelling OZ...
(www.popadd.com/overlandy2006)

My RRC's slave cylinder uses a Sigma wheel cylinder rubber. But I have no idea if the RR's slave cylinder is the same as yours.

Dutchie,
A good place for parts is "Four Wheel Drives" in Melbourne. They post to anywhere in the country. they also have a catalogue of all therir parts.
Approx $15.00 for the catalogue. Their number is
03 9890 0509.

Mal