Results 1 to 8 of 8

Thread: Corrugated Roads and Loctite

  1. 8th June 2007, 02:09 AM #1
    DirtyDawg's Avatar
    DirtyDawg
    DirtyDawg is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    2,382
    Total Downloaded
    0

    Corrugated Roads and Loctite

    Well Champs, after traveling over 300km on the worse corrugations I have experienced I have spent 2 hours yesterday, tightening and replacing lost or loose fittings on "The Pig"...
    Gotta wonder how many years of wear it put on the car...
    ie Corrugations were approx 15cm high about 25cm apart..with road holes you could put a Zook in...can go too fast as the Holes will get you, can't go too slow as corrugations rattle the ship out of you..

    So I have replaced ordinary Nuts with Lock nuts and others with some LOC tite...

    What causes Corrugations on road surfaces, is just wind, why the build up if 2ton cars up and down the buggers???
    Last edited by DirtyDawg; 9th June 2007 at 07:39 AM.
    Reply With Quote Reply With Quote
  2. 8th June 2007, 07:02 AM #2
    Grimace's Avatar
    Grimace
    Grimace is offline YarnMaster Silver Subscriber
    Join Date
    Jan 1970
    Location
    Gold Coast, QLD
    Posts
    3,570
    Total Downloaded
    0
    10 minutes of corrugations is like 2 years of driving when it comes to suspension (bushes etc)... can't remember where I herd it or who told me it but it was some outback adventure dude half way across the kimberleys

    luv grimace
    Reply With Quote Reply With Quote
  3. 8th June 2007, 09:06 AM #3
    DirtyDawg's Avatar
    DirtyDawg
    DirtyDawg is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    2,382
    Total Downloaded
    0
    Quote Originally Posted by Grimace View Post
    10 minutes of corrugations is like 2 years of driving when it comes to suspension (bushes etc)... can't remember where I herd it or who told me it but it was some outback adventure dude half way across the kimberleys

    luv grimace
    Well arent I lucky I have a full Bush kit in the shed ready to go...lol...Now how to convince the missus the motor is rooted and I need that chev diesel
    Reply With Quote Reply With Quote
  4. 8th June 2007, 11:05 AM #4
    Davo
    Davo is offline ChatterBox Silver Subscriber
    Join Date
    May 2007
    Location
    WA
    Posts
    2,595
    Total Downloaded
    0
    I've used Nylocs, (those nuts with the nylon insert at one end), with blue 243Loctite on them for years and years and pretty well never have any problems with things coming loose. So far it's been the best answer to corrugations I've come across.

    Apart from following a grader crew, at least.
    Reply With Quote Reply With Quote
  5. 8th June 2007, 11:09 AM #5
    Camo's Avatar
    Camo
    Camo is offline Wizard Silver Subscriber
    Join Date
    Sep 2004
    Location
    Gold Coast
    Posts
    1,428
    Total Downloaded
    0
    Now how to convince the missus the motor is rooted and I need that chev diesel
    Just say the bolts holding the pistons in would be loose and can be dangerous
    2004 Black Range Rover L322 Diesel
    Reply With Quote Reply With Quote
  6. 8th June 2007, 11:57 AM #6
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,560
    Total Downloaded
    0
    bring it over I'll find a hundred reasons to red x the motor for ya....

    Just remeber that you can use those double edged anti rattle washers as well


    I mainly use em for the smaller fittings and self tappers that go into plastic wher eyou cant use loctite
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  7. 9th June 2007, 07:34 AM #7
    Koukandowie Brangus's Avatar
    Koukandowie Brangus
    Koukandowie Brangus is offline Master Gold Subscriber
    Join Date
    Nov 2006
    Location
    Alice Springs, Australia
    Posts
    360
    Total Downloaded
    0
    10 minutes = 2 years? no wonder my suspension is crook, must be like a 1000 yrs old!!!!!
    Reply With Quote Reply With Quote
  8. 9th June 2007, 08:46 AM #8
    JDNSW's Avatar
    JDNSW
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,706
    Total Downloaded
    0
    Quote Originally Posted by DirtyDawg View Post
    ......

    What causes Corrugations on road surfaces, is just wind, why the build up if 2ton cars up and down the buggers???
    See http://www.abc.net.au/science/k2/trek/4wd/Overcor2.htm

    Says it all.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« doors for a 110 | New D2 V8 exhaust »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!