Both....
Hi all,
Any suggestions as to which is best, a low coolant level alarm, or a block over temperature alarm? Has anyone tried these?
http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=004
It looks pretty useful, and also makes noise when your TD5 oil pump bolt comes loose....
Cheers all,
Paul
Both....
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Check the other thread. just posted there
Surely being alerted that the block is GOING to get hot (no coolant!) would be better than knowing it's already happened?
You want both.
I bought and installed one of the Watchdogs.
I bought it mainly as insurance after fitting thermo fans. Just incase they fail while I am too busy to be watching the temp. In this scenario, a low coolant level alarm would be pointless.
I have a three way switch for the thermo's, 1) Temperature controlled, 2) Permanently ON, and 3) Permanently OFF (for water crossings). On about 4 occasions now, the switch has been bumped while offroad, and switched to the OFF position (I know, I should probably move it). The Watchdog alarm went off each time to warn me WELL before any damage could be done. The alternative could be rather expensive.
Cheers
Andre
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks