Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Disco resurfaces gateway

  1. #11
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    would be interesting if they were the same hose---
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  2. #12
    Join Date
    Jan 2007
    Location
    Gosnells, WA
    Posts
    512
    Total Downloaded
    0
    Quote Originally Posted by Pedro_The_Swift View Post
    would be interesting if they were the same hose---
    It sure would. I need to climb under mine and investigate a transmission fluid leak underneath the radiator. It doesn't seem that bad at the moment.

  3. #13
    Join Date
    Jan 1970
    Location
    Capalaba.Q.L.D.
    Posts
    359
    Total Downloaded
    0
    mine was pass side. drivers side (SEEMS) ok.
    easy fix is to grind off old clamp and replace hose using a good hose clamp.
    on mine the airbox was removed and access was quite good.(lr wise). Just be aware the plug is one of those strange types that is not carried in most breakdown kits.
    Should have took some pics but there was more oil under there then Bass Straight!

  4. #14
    Join Date
    Jan 2007
    Location
    Gosnells, WA
    Posts
    512
    Total Downloaded
    0
    Quote Originally Posted by tracker View Post
    Just be aware the plug is one of those strange types that is not carried in most breakdown kits.
    Is it one of those push on fittings? If so should have some at work. Unless it is something peculiar to LR.

  5. #15
    Join Date
    Jan 1970
    Location
    Capalaba.Q.L.D.
    Posts
    359
    Total Downloaded
    0
    sorry Phil,I was talking about the filler plug in the front of the gearbox.I think its called a torx.

  6. #16
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Quote Originally Posted by tracker View Post
    good one scouse.you put the mocca on me.
    quick disconnect came off after a couple of kays and lost fluid again.
    I won't say I told you so but.......I told you so !!


    also found rattle at 2300 rpm.exhaust pipe was pressing on bolt that hold the balence thingee at the rear diff.(cut off thread)
    Great design, isn't it. For a while, I had quite a collection of warranty tailpipe sections with a nice hole worn in them from that bolt.
    Scott

  7. #17
    Join Date
    Jan 1970
    Location
    Capalaba.Q.L.D.
    Posts
    359
    Total Downloaded
    0
    quote
    Great design, isn't it. For a while, I had quite a collection of warranty tailpipe sections with a nice hole worn in them from that bolt.
    the pipe had worn about 3 threads off one side of bolt.
    the vibration noise drove me crazy when pulling boat up hills etc.I thought the flex plate on the converter was stuffed.
    Last edited by tracker; 28th August 2007 at 08:31 AM.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!