bugger thats bad luck mate...what about getting one fabricated somewhere....its a hell of an exercise trying to replace one ....expensive for any new or replacement dizzy.
Printable View
bugger thats bad luck mate...what about getting one fabricated somewhere....its a hell of an exercise trying to replace one ....expensive for any new or replacement dizzy.
Quote:
Originally Posted by ozscott
where would i get one fabricated??? and yes its a pain in the ars, such a little clip can stuff up a whole engine, it really gets me.
cheers
As I said in my earlier post I was visiting a local auto electrician for some bits for my dissy - he told me to rummage in his dead dissy bin and there were a couple of old Rover car V8 dissys in the bin - most of the mechanical bits are the same from the early 70s through to the late 90s and are similar to Land Rover stuff - the dissy I found cost $5 and had all the springs, clips etc but the electrics were different - so if it is clips or springs etc that you need check around your local auto electricians - this was the first auto electrician I visited and he had exactly what I needed.Quote:
Originally Posted by cucinadio
Garry
You might be able to go to a machine shop with the dizzy and a pic of the area it goes into ....long shot though.
Hay guys,Quote:
Originally Posted by cucinadio
thanks guys for all your help, ive finally tracked one down from gold coast 4wd wreckers $ 165 would u belive yhea baby
cheers
:eek: Who would've thought this came from a "Tech" section :Rolling:Quote:
Originally Posted by ozscott