Printable View
Hi Chazza
You need to drop the glass to the lowest point and undo the 2 bolts that hold the glass to the mechanism,then lift the glass till closed and wedge so it stays up.Then remove ref-fit mechanism then lower glass then replace the 2 bolts that secure it to the mechanism.
ENJOY!!! You have probably already sorted it out!!!!
Andrew
I replaced the passenger side front regulator a couple of weeks ago and all the bolts were loose
Im guessing with the constant bumps and bangs the whole car gets they are bound to come loose at some point
Got around to doing my driver's side front window today. Regulator is stuffed, rollers are stuffed... but it isn't loose. So I've ordered a new one. Very clean inside so don't know why it would go in less than 5 years :mad: